Having a part ? scanned into CAD and made into metal?
Having a part ? scanned into CAD and made into metal?
Author
Discussion

gingerbeard

Original Poster:

112 posts

156 months

Saturday 16th May 2015
quotequote all
As above really, I have a small plastic part that ideally I would like made of metal.

Does anyone know anywhere I could send this to be done and brought costs of it?

Thanks in advance.

Chris

rustandoil

89 posts

203 months

Saturday 16th May 2015
quotequote all
Could you post a photo of the part?

ChemicalChaos

10,714 posts

191 months

Saturday 16th May 2015
quotequote all
post a photo with dimensions and there's enough CAD users on here (me included) that could easily draw it out and turn it into a machine shop diagram for you

fatboy b

9,666 posts

247 months

Saturday 16th May 2015
quotequote all
I work for a PLM reseller, and we've worked with this company. Good guys.

http://www.3dsystems.com

gingerbeard

Original Poster:

112 posts

156 months

Saturday 16th May 2015
quotequote all
Thanks for the help so far, I have attached some photos with Abe Lincoln for size comparison!
[url]

|http://thumbsnap.com/FBq6wWen[/url] [url]

|http://thumbsnap.com/JylNHkhh[/url]

Viperz888

561 posts

189 months

Saturday 16th May 2015
quotequote all
How critical is the geometry of the curves?
What material do you want it the be made from?
What surface finish do you want to achieve?
Does it matter if it is cast or milled?

Impasse

15,099 posts

272 months

Saturday 16th May 2015
quotequote all
Isn't this type of thing exactly what 3D printers were invented for?

Dibble

13,292 posts

271 months

Saturday 16th May 2015
quotequote all
What is the non-Abe Lincoln part?

gingerbeard

Original Poster:

112 posts

156 months

Saturday 16th May 2015
quotequote all
The part is a feed ramp for a semi auto shotgun, the part need to be reasonably smooth but nothing perfect. The problem is with the plastic in that if the action releases suddenly when dismantling it destroys the feed ramps so needs to be made of metal really. I was just seeing if it was an easy thing to do for someone in the know or if it is a total ballache and would cost a fortune as quite frankly I don't have a clue about this kind of thing!

Thanks,

Chris

randlemarcus

13,646 posts

262 months

Saturday 16th May 2015
quotequote all
Just a thought. Is a plastic feed ramp cheaper to replace than the action which just ran up against a solid metal part? Is it deliberately fragile, like a front splitter on a car?

Ultraviolet

625 posts

247 months

Saturday 16th May 2015
quotequote all
Impasse said:
Isn't this type of thing exactly what 3D printers were invented for?
Would tend to agree, try

http://www.emachineshop.com

rk176

24 posts

226 months

Saturday 16th May 2015
quotequote all
It's not an easy part to make due to its size. If your lucky you might get it machined for around £250. That price is a guesstimate on parts I've been reworking this week machined by this company http://www.protolabs.co.uk/firstcut

gingerbeard

Original Poster:

112 posts

156 months

Sunday 17th May 2015
quotequote all
Thanks for all of your help. It would seem that is is prohibitively expensive to manufacture after some more research. Yep 3D printers will apparently do it but I really wanted it in metal.

You have answered all of my questions and thanks for you time

Have a good Sunday!

Chris

hidetheelephants

36,443 posts

224 months

Sunday 17th May 2015
quotequote all
Try Shapeways; you might end up fettling the end product with a file or a dremel to get it to a finished product but it will be an easier place to start from than filing from a block of metal. Not cheap mind.

smack

9,777 posts

222 months

Sunday 17th May 2015
quotequote all
What shotgun is it for? If it is prone to damage, I am sure they are cheap and easy to get in the US.

egroeg

41 posts

139 months

Sunday 17th May 2015
quotequote all
Got any uni's with a mech eng dept near you? I'd have knocked one up for you for some beer money so I'm sure others would. Usually you have free workshop access.

Blib

48,377 posts

228 months

Sunday 17th May 2015
quotequote all
Abe Lincoln was well over six feet tall.

GC8

19,910 posts

221 months

Sunday 17th May 2015
quotequote all
gingerbeard said:
As above really, I have a small plastic part that ideally I would like made of metal.

Does anyone know anywhere I could send this to be done and brought costs of it?

Thanks in advance.

Chris
Somewhere, I have a link for a company who would be ideal. You download their cad/cam application and draw the item, which is priced by the software. If youre happy then you pay online then wait for a week or two and it is delivered.

I cant even remember their name unfortunately, so you cant find them yourself unless this prompts someone elses memory.

If I find the link then I will post it, of course.

750turbo

6,164 posts

255 months

Sunday 17th May 2015
quotequote all
Ultraviolet said:
Impasse said:
Isn't this type of thing exactly what 3D printers were invented for?
Would tend to agree, try

http://www.emachineshop.com
Exactly - I reckon that when these come down in price, they will take off big time.

Crappy little trim clips, retainers, chain guides etc... Get an image of the net, feed it into the relative SW, and "print" using whatever material.


CubanPete

3,820 posts

219 months

Tuesday 19th May 2015
quotequote all
3D printing in metal is expensive, and unless you can make a few changes machining will be difficult / expensive.

Could you get it cast? Cuttlefish casting in aluminium could be done in the garden is OK.