Need a photoshop expert
Discussion
... well not even an expert, just someone who isn't as hamfisted with me.
Trying to get some stickers made up for a little side venture, I've made a logo on Photoshop that I am (somewhat) happy with, but I've got stuck at the point of making a cut layer
I've done some googling, but there don't seem to be any comprehensive guides.
Could anybody help?

Trying to get some stickers made up for a little side venture, I've made a logo on Photoshop that I am (somewhat) happy with, but I've got stuck at the point of making a cut layer
I've done some googling, but there don't seem to be any comprehensive guides.Could anybody help?
Viperz888 said:
Apparently I need a line around the border of the image to tell the cutter where to cut the edges of the graphic
. This is all greek to me, I hate computers.
I'm assuming the "cut" isn't a simple rectangle then?
. This is all greek to me, I hate computers.So you need to trace the outline of the image and then enlarge the outline slightly and position it over the original image? Or am I missing something.
It might be something best done in Adobe Illustrator? Either way this is a guide for Illustrator that might be sufficient.
https://www.zapcreatives.co.uk/t-tutorial_stickers...
If I understand correctly -
Use the magic wand tool on the left palette and click in you logo/image that you want to select - Once this is selected you can created a new cut layer from - Layer > New > Layer via Cut
This should give you a new layer with only your logo in it
In the layers panel you will see a new layer - you can just delete the one or ones you don't need
Hope this helps
Use the magic wand tool on the left palette and click in you logo/image that you want to select - Once this is selected you can created a new cut layer from - Layer > New > Layer via Cut
This should give you a new layer with only your logo in it
In the layers panel you will see a new layer - you can just delete the one or ones you don't need
Hope this helps
nope.
its a border ( one of a number) that surrounds the image.
https://www.psprint.com/helpcenter/preparing_artwo...
that'll help. i have no affiliation to the site or company.
its a border ( one of a number) that surrounds the image.
https://www.psprint.com/helpcenter/preparing_artwo...
that'll help. i have no affiliation to the site or company.
Viperz888 said:
Apparently I need a line around the border of the image to tell the cutter where to cut the edges of the graphic
. This is all greek to me, I hate computers.
A cutter guide.
. This is all greek to me, I hate computers.Cheesesliceking is spot on.
It's to do with bleed & trim dimensions.
Try to keep the process as mechanised as possible. You can make a selection of the area you need, create a new layer, expand the selection by the desired amount and then stroke the selection in a bold colour to highlight it.
As the link says, different colours for different aspects.
Don't do it freehand though. Not accurate enough.
Gassing Station | The Lounge | Top of Page | What's New | My Stuff


