I have balls of steel!
I have balls of steel!
Author
Discussion

Mobsta

Original Poster:

5,614 posts

286 months

Sunday 7th June 2015
quotequote all
I've got two chrome plated steel balls, about 35mm, to use in photography. Picked them up today.

Ideally they would be bigger, but my main issue with them is that over the decades, they have picked up hundreds of tiny scratches and imperfections.

Two questions.
Firstly, does anyone have or know where to get some brand new balls with a factory perfect finish? I've tried eBay but the big balls (stop sniggering at the back) are costly.

Secondly, with what might I polish out these imperfections and could i, or is that not going to happen due to their robust nature?

Photography will be virtually macro, so I really am after a perfect pair, set or single ball.

Thanks in advance.

Gargamel

16,426 posts

292 months

Sunday 7th June 2015
quotequote all
Must be easier to re plate them than polish them.

Try T cut ?


Matt172

12,415 posts

275 months

Sunday 7th June 2015
quotequote all

227bhp

10,203 posts

159 months

Sunday 7th June 2015
quotequote all
Try your closest Chrome platers, they might be able to polish them out or rechrome them.

This throws up two questions for me:
1. How do you chrome plate something which you cannot touch or hang while the operation is taking place?
2. What do you use them for? Taking shots via the reflection?

Mobsta

Original Poster:

5,614 posts

286 months

Sunday 7th June 2015
quotequote all
Gargamel said:
Must be easier to re plate them than polish them.

Try T cut ?
Never thought of t-cut.... I could polish them off in a sock whilst watching TV. hehe

Actually... Can chrome be t-cut? Anyone want to second the motion before I ruin one of them?

Sharted

3,175 posts

174 months

Sunday 7th June 2015
quotequote all
Cape Cod cloths?

Mobsta

Original Poster:

5,614 posts

286 months

Sunday 7th June 2015
quotequote all
I'll check out the link Matt, ty.
227bhp said:
Try your closest Chrome platers, they might be able to polish them out or rechrome them.

This throws up two questions for me:
1. How do you chrome plate something which you cannot touch or hang while the operation is taking place?
2. What do you use them for? Taking shots via the reflection?
i also wondered just now about the replaying without touching problem, no idea if it's possible.

Regarding macro photog, hide the lens within the scene I guess, as best you can!

Mobsta

Original Poster:

5,614 posts

286 months

Sunday 7th June 2015
quotequote all
I'll check out the link Matt, ty.
227bhp said:
Try your closest Chrome platers, they might be able to polish them out or rechrome them.

This throws up two questions for me:
1. How do you chrome plate something which you cannot touch or hang while the operation is taking place?
2. What do you use them for? Taking shots via the reflection?
i also wondered just now about the replaying without touching problem, no idea if it's possible.

Regarding macro photog, hide the lens within the scene I guess, as best you can!

Jonboy_t

5,038 posts

214 months

Sunday 7th June 2015
quotequote all
Wd40 and wire wool.

I've got chrome hubcaps on my van and they show surface rust and little dots within minutes of being outside. Couple of minutes with the above and they shine like brand new.

blod

310 posts

235 months

Sunday 7th June 2015
quotequote all
You could try Solvol Autosol metal polish.

Janluke

3,125 posts

189 months

Sunday 7th June 2015
quotequote all
Google "Blue Job" chrome polish,I use it on my bike exhausts, best polish I've used for bluing etc

WildCards

4,061 posts

248 months

Sunday 7th June 2015
quotequote all

Bodo

12,626 posts

297 months

Sunday 7th June 2015
quotequote all
How much for a new one is too expensive?

35.719 mm, deep polished, 6 pieces, €12.70
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

76.200 mm, deep polished, 1 pieces, €33.90
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

available up to 120mm diameter.

Ace-T

8,415 posts

286 months

Sunday 7th June 2015
quotequote all
blod said:
You could try Solvol Autosol metal polish.
Autosol is the best metal polish. Used it on MG chrome bumpers for years. Whether it will be enough to sort your balls out for a high res photo is another matter. However, if it does work, wipe over with WD40 after to keep the chrome looking good.

Do NOT use wire wool, it is too harsh.

Thankyou4calling

11,045 posts

204 months

Sunday 7th June 2015
quotequote all

Mobsta said:
Never thought of t-cut.... I could polish them off in a sock whilst watching TV. hehe

Actually... Can chrome be t-cut? Anyone want to second the motion before I ruin one of them?
That will be a fun evening :-)

Mobsta, on another matter, were you the guy who drew charicatures from dating websites?

If you were please start doing it again because it was a FANTASTIC THREAD.

Mobsta

Original Poster:

5,614 posts

286 months

Wednesday 10th June 2015
quotequote all
Bodo said:
How much for a new one is too expensive?

35.719 mm, deep polished, 6 pieces, €12.70
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

76.200 mm, deep polished, 1 pieces, €33.90
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

available up to 120mm diameter.
Im going to have to buy the bigun, judging by its weight it's the 76mm one you mention. I'd love to figure out how to browse the site on my phone, I don't understand a word of it hehe

Thankyou4calling said:
That will be a fun evening :-)

Mobsta, on another matter, were you the guy who drew charicatures from dating websites?

If you were please start doing it again because it was a FANTASTIC THREAD.
Aye, I enjoyed the dating website drawings, but didn't want to continue in earnest, as much as I wanted to do something arty and creative, as I felt it was morally wrong to pursue something that would popularise the belittling of others. I did think about doing more as we all had a good laugh, but didn't for that reason.

Edited by Mobsta on Wednesday 10th June 19:38

jkh112

23,948 posts

189 months

Wednesday 10th June 2015
quotequote all
On the German wbsite they have the same diameter balls in both G100 and G200 spec with little difference in price. The G100 is to tighter tolerances so would be better for your photography (assuming you are able to pick up the difference). If you go up to the even larger sizes then they are available in extra poliert, or highly polished which should suit you better.

Mobsta

Original Poster:

5,614 posts

286 months

Thursday 18th June 2015
quotequote all
jkh112 said:
On the German wbsite they have the same diameter balls in both G100 and G200 spec with little difference in price. The G100 is to tighter tolerances so would be better for your photography (assuming you are able to pick up the difference). If you go up to the even larger sizes then they are available in extra poliert, or highly polished which should suit you better.
Any chance you can link to the largest shiniest ball, plus something in the middle. I'll take your word for it and just go ahead and order. Shiny is better, especially if it's smoother. Cheers.

Bodo

12,626 posts

297 months

Saturday 20th June 2015
quotequote all
chrome steel 110mm 99.70€
http://www.kugel-winnie.de/epages/62136757.sf/de_D...
There's 120mm as well, but out of stock.

stainless steel 100mm 179€
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

decorative (possibly not ball bearing quality round) 60mm 6.95€
http://www.kugel-winnie.de/epages/62136757.sf/de_D...

TheJimi

27,797 posts

274 months

Saturday 20th June 2015
quotequote all
From domesticated elephants to big shiny balls; PH delivers yes