Discussion
a new interior light arrived this morning for the landrover.
I dont really need the instructions but...
Must cut off the switch of the storage battery bracket before installing, Then, remove the original one,and pull out the wire, make sure that the function of every one of them (the red one is anode, the blue is cathode, and the yellow one is the door lamp), according to the above chart to get the original wire through the centre hole of the baseplate, and fix it well with screws,tie it up wellafter joining the relative down-lead, and then fill the rest down-lead in the ceiling, insert the main body at the same time, fix it after gliding and inlaying.
very helpful thanks
I dont really need the instructions but...
Must cut off the switch of the storage battery bracket before installing, Then, remove the original one,and pull out the wire, make sure that the function of every one of them (the red one is anode, the blue is cathode, and the yellow one is the door lamp), according to the above chart to get the original wire through the centre hole of the baseplate, and fix it well with screws,tie it up wellafter joining the relative down-lead, and then fill the rest down-lead in the ceiling, insert the main body at the same time, fix it after gliding and inlaying.
very helpful thanks
Gassing Station | The Lounge | Top of Page | What's New | My Stuff



