Freshening up a wax jacket ?
Discussion
The outer is pristine, doesn’t need a rewax, it’s the inside. It’s a biker jacket which I took with me on a riding holiday thinking the weather would be cooler…. It’s not stinky but it’s not fresh either.
I’ve googled, but the guidance is either for the outer only or is weird, saying to spray diluted vodka on it then rub with vanilla pods…
Any country types in with more sensible suggestions?
I’ve googled, but the guidance is either for the outer only or is weird, saying to spray diluted vodka on it then rub with vanilla pods…
Any country types in with more sensible suggestions?
Is there any reason you couldn't open it up on the carpet and use a carpet shampooer with the small upholstery attachment on the inside?
Something like this?
https://www.currys.co.uk/products/bissell-spotclea...
Something like this?
https://www.currys.co.uk/products/bissell-spotclea...
Harry H said:
Chuck it in the washing machine and re-wax it. It's pretty simple. Did 3 of our Barbours last year. Didn't take long and they all look like new.
Stick the tin of wax in a saucepan of hot water. Wait for it to melt and then just sponge it on. Leave to dry and presto. New jacket.
+1Stick the tin of wax in a saucepan of hot water. Wait for it to melt and then just sponge it on. Leave to dry and presto. New jacket.
This has been discussed before. Don't put in in a machine, there's another layer of wax on the inside of the lining, facing the inside of the outer layer the jacket which stops the outer wax from getting through when you reproof it. At least, Barbours do.
OK about cleaning the inside. Turn the jacket inside out, put it in a bath of cold water without detergent, soak it overnight, agitate the lining by scrubbing it gently with a softish brush.
I use the same technique on the outside but with a stiffer brush seeing as its thornproof. Rinse, let it drip dry. This is what Barbour recommend for cleaning without proofing.
OK about cleaning the inside. Turn the jacket inside out, put it in a bath of cold water without detergent, soak it overnight, agitate the lining by scrubbing it gently with a softish brush.
I use the same technique on the outside but with a stiffer brush seeing as its thornproof. Rinse, let it drip dry. This is what Barbour recommend for cleaning without proofing.
James6112 said:
Harry H said:
Chuck it in the washing machine and re-wax it. It's pretty simple. Did 3 of our Barbours last year. Didn't take long and they all look like new.
Stick the tin of wax in a saucepan of hot water. Wait for it to melt and then just sponge it on. Leave to dry and presto. New jacket.
+1Stick the tin of wax in a saucepan of hot water. Wait for it to melt and then just sponge it on. Leave to dry and presto. New jacket.
Gassing Station | The Lounge | Top of Page | What's New | My Stuff


