foundation bolts? (random request of the day)
foundation bolts? (random request of the day)
Author
Discussion

shirt

Original Poster:

25,556 posts

232 months

Friday 29th October 2010
quotequote all
righto, not sure where to put this as it's not home or DIY related, but i've no doubt it'll end up there.

i need a small quantity of M20 and M24 foundation bolts, approx. 300mm long, as per middle right of this pic [or similar]



do any of the civils/construction types on here know where i can buy them from stock? the only places i can find online [brooks forgings etc.] require a minimum order of 'a couple of hundred'.

i don't normally do foundations but this is a very small part of a project, i only need 20 bolts.

cheers.

Tom_C76

1,923 posts

219 months

Friday 29th October 2010
quotequote all
Try Inform UK or Burdens. Think they both stock them.

Or cast a flat foundation and use M24 resin anchors once it has gone off. Much easier.

Benzman

231 posts

231 months

Friday 29th October 2010
quotequote all
Try C W Berry of Leyland in Lancashire

Their place is huge, if they don't stock you probably can't get it.

AndyFoo

1,432 posts

206 months

Friday 29th October 2010
quotequote all
http://www.nutsaboutbolts.org/index.html

If they're like any other engineering firm, they'll be glad for the work.

shirt

Original Poster:

25,556 posts

232 months

Friday 29th October 2010
quotequote all
i only need 16 anchors, so it gets expensive to have them made.

thanks for the suggestions tom, though i can't see exactly what it is i am looking for on those sites.

i think i'm going to use hold down bolts, a resined rawlbolt isn't sufficient imo as these are to be used to secure an A frame lifting hoist.

Benzman

231 posts

231 months

Friday 29th October 2010
quotequote all
I'm Finance Director of a large structural steel group, my earlier suggestion of C W Berry's was an FD trying to be a buyer. Our buyer says you will definately get what you want from:

BAPP Industrial Supplies (Lancashire) Limited
Belfield Road
Rochdale
OL16 2UX

01706 359500


Kiltie

7,505 posts

277 months

Mark Benson

8,264 posts

300 months

Friday 29th October 2010
quotequote all
I see you're in Yorkshire, are you within driving distance of Northallerton?

Sam Turners have never let me down when needing odd shaped fixings etc. They're a farm supplier, but they have an awful lot of hardware too.

(01609) 772422

sal 965

586 posts

242 months

Friday 29th October 2010
quotequote all
Benzman said:
I'm Finance Director of a large structural steel group, my earlier suggestion of C W Berry's was an FD trying to be a buyer. Our buyer says you will definately get what you want from:

BAPP Industrial Supplies (Lancashire) Limited
Belfield Road
Rochdale
OL16 2UX

01706 359500
Based in Rossendale or off the M58?

Benzman

231 posts

231 months

Friday 29th October 2010
quotequote all
sal 965 said:
Benzman said:
I'm Finance Director of a large structural steel group, my earlier suggestion of C W Berry's was an FD trying to be a buyer. Our buyer says you will definately get what you want from:

BAPP Industrial Supplies (Lancashire) Limited
Belfield Road
Rochdale
OL16 2UX

01706 359500
Based in Rossendale or off the M58?
No Rochdale itself, just off the A664

shirt

Original Poster:

25,556 posts

232 months

Friday 29th October 2010
quotequote all
their site says there's one a few miles from work. I'll check them out, cheers.