Torque Angle Conversion
Torque Angle Conversion
Author
Discussion

Merp

Original Poster:

2,262 posts

283 months

Wednesday 24th November 2010
quotequote all
Im not really sure which section this goes into, so mods move if need be.

Does anybody know how to conver a Torque/Angle into a straight torque and if possible visa versa.

Ive got a XXNM torque and XXdegree assembly torque.
I'm removing these bolts and want to measure if the bolts have relaxed during operation.

I've scribed a line across the bolt and will measure the final torque back to the scribe line.
Our angle dial is nakard so im going to have to calculate back from a straight torque if that is possible.
Or convert the 380+90dg to straight torque, which I guess is about 500ish.

Hunting on google and any site I find with calculators seem to be blocked.


Edited by Merp on Wednesday 24th November 12:27

Pickled Piper

6,452 posts

266 months

Wednesday 24th November 2010
quotequote all
You need to elaborate. Torque is always rotational.

What is it you are doing exactly? Does the manual state tighten to 380Nm and then 90deg? If so tighten to 380NM using a torque wrench, then use the scribed line method to add 90deg.

pp

duncancallum

987 posts

209 months

Wednesday 24th November 2010
quotequote all
Do you not have a length listed for the bolts? As its similar to many head bolts and they have a maximum length tollerance(sp)

cal72

7,839 posts

201 months

Wednesday 24th November 2010
quotequote all
Was actually reading this the other day, it might help.

http://www.hexagon.de/tasignat.htm

Merp

Original Poster:

2,262 posts

283 months

Wednesday 24th November 2010
quotequote all
cal72 said:
Was actually reading this the other day, it might help.

http://www.hexagon.de/tasignat.htm
Thanks that is quite interesting actually.

Forget the original post, we re-torqued the component and measures a final straight torque as apposed to angle.

bucksmanuk

2,426 posts

201 months

Wednesday 24th November 2010
quotequote all
http://www.amazon.co.uk/Introduction-Design-Behavi...

THE reference standard - nothing else comes close - mite pricey though. And NO, you can’t borrow mine,