Fuel Resistant Wire & Bulkhead Electrical Connector

[356Speedster]

Folks, I need some help..... I'm replacing a submerged fuel pump in a swirl pot, but am struggling with sourcing some electrical bits.

Firstly, I want to use fuel resistant wiring inside the pot to power the pump. The wiring from the old pump isn't serviceable, so I need to install new, however, I'm struggling to find anyone confidently selling fuel resistant cable. Can anyone point me in the right direction? I believe normal PVC will degrade overtime, if left in fuel, which rules out "normal" wiring and heatshrink tubing. Any ideas?

Secondly, I also want to replace the bulkhead-type power terminals in the top of the swirl pot with new ones. The only ones I can find are in Australia and the seller won't give me UK shipping. Can anyone direct me to a UK seller for these: Bulkhead Electrical Post Terminals

Thanks for your help!

[Penelope Stopit]

Use PTFE Coated Cable

Are these any good https://www.littelfuse.com/products/other-products...

Edited by Penelope Stopit on Tuesday 12th February 15:46

[E-bmw]

These do.

https://www.ebay.co.uk/itm/New-RACEWORKS-2PK-Elect...f:0

[356Speedster]

Penelope Stopit said:

Use PTFE Coated Cable

Are these any good https://www.littelfuse.com/products/other-products...

Edited by Penelope Stopit on Tuesday 12th February 15:46

Many thanks, I'll look at the Pass Thru Block in more detail...... PTFE cable, perfect, thanks!