Space tyre
Author
Discussion

bazjude2998

Original Poster:

666 posts

155 months

Wednesday 29th May 2019
quotequote all
Not sure if this is the right forum
Will the tyre off a space saver wheel 125 -80 15” fit on a 15” x4” wide wire wheel
Thanks

dhutch

17,917 posts

228 months

Wednesday 29th May 2019
quotequote all
Proberly? What it going onto?

InitialDave

15,157 posts

150 months

Wednesday 29th May 2019
quotequote all
Should do, yeah. But why?

GreenV8S

31,027 posts

315 months

Thursday 30th May 2019
quotequote all
It would need to be designed for the same rim section, and the right size.

finishing touch

818 posts

198 months

Thursday 30th May 2019
quotequote all
As they are made to replace a tyre three times the size and run at twice the pressure I would think the sidewalls are built like nuclear bunkers.


Paul G

bazjude2998

Original Poster:

666 posts

155 months

Thursday 30th May 2019
quotequote all
dhutch said:
Proberly? What it going onto?
The tyre is going onto a 4” wire wheel as stated.The issue is limited space to stow the spare
It’s a 1962 Grantura
Thanks

E-bmw

13,609 posts

183 months

Thursday 30th May 2019
quotequote all
The issue is more likely to be the other way round, as in, is that rim designed for that tyre as in, tubeless.

dhutch

17,917 posts

228 months

Thursday 30th May 2019
quotequote all
bazjude2998 said:
The tyre is going onto a 4” wire wheel as stated.The issue is limited space to stow the spare
It’s a 1962 Grantura
Thanks
Presumably the other wheels have tyres, of a known/working spec, but don't fit in the spare well? Owners club you can ask?

If it's a spare I wouldn't worry too much about stiff sidewalls, but obviously it needs sit in the rim nicely. Would you be running it with a tube?

Daniel

bazjude2998

Original Poster:

666 posts

155 months

Thursday 30th May 2019
quotequote all
dhutch said:
Presumably the other wheels have tyres, of a known/working spec, but don't fit in the spare well? Owners club you can ask?

If it's a spare I wouldn't worry too much about stiff sidewalls, but obviously it needs sit in the rim nicely. Would you be running it with a tube?

Daniel
Yes I think it would have to have a tube
My real concern is would the tyre fit a spoked rim or are these space saver wheels and tyres designed specifically to match each other

dhutch

17,917 posts

228 months

Thursday 30th May 2019
quotequote all
As far as I know 'space savers' have the same rim profile as any other modern tyre.

GreenV8S

31,027 posts

315 months

Thursday 30th May 2019
quotequote all
dhutch said:
As far as I know 'space savers' have the same rim profile as any other modern tyre.
I think so too. I have no idea whether you can say the same of an unknown wire spoked wheel.

finishing touch

818 posts

198 months

Friday 31st May 2019
quotequote all
As a spoked wheel has a pressed & rolled rim I would think you can see the rim profile from the outside, minus a thickness of metal.



As a matter of interest has anyone taken a space saver tyre off the rim? I have two, both over 16 years old but they are not the sort of thing
that you ever replace. Mine still have the cast nipples on them, although one has done six miles.

Paul G

G600

1,480 posts

218 months

Friday 31st May 2019
quotequote all
What about the speed rating of the tyre? Space savers are normally marked at 50mph or so, I'm not sure if that's the limit of the tyre or just because it doesn't match the other 3.

dhutch

17,917 posts

228 months

Friday 31st May 2019
quotequote all
G600 said:
What about the speed rating of the tyre? Space savers are normally marked at 50mph or so, I'm not sure if that's the limit of the tyre or just because it doesn't match the other 3.
Valid to check, but if it's only for the spare...