Battery Used Up Test
Battery Used Up Test
Author
Discussion

Stindle

Original Poster:

1 posts

89 months

Saturday 15th June 2019
quotequote all
Hello - just had my alternator replaced at a random garage near where we broke down. They said we needed a new battery based on a Battery Used Up test that measured 287A EN against a desired rating of 550A EN. Volts was 12,29V.

I can plenty of info on the voltage which is fine. But I can’t verify the advice that the battery should be replaced based on the 287 measurement versus the desired 550. Can anyone help me determine if I should indeed replace the battery? Thank you in advance for any help

Penelope Stopit

11,209 posts

140 months

Saturday 15th June 2019
quotequote all
Have it re-tested

With the battery fully charged and allowed to stand to cool down for several hours

Discharge test of 3 x Battery AH capacity for 15 seconds..........Voltage should not drop below 9.6 Volts

E-bmw

13,609 posts

183 months

Saturday 15th June 2019
quotequote all
^^^^ Wot 'e said.

They are obviously testing the battery when they know the alternator is defective or just replaced, to be meaningful a battery test should only be conducted on a fully charger battery.

Having said that if it still only gets to 12.29 when then fully charged & stood it is pretty stuffed.