How to stick this to this?

[carreauchompeur]

Gas locker door from my Hymer motor home. It’s been screwed and stuck back before but is now slightly adrift. Thinking of some kind of adhesive?!

[anonymous-user]

That looks the the same door on on our camp 55. Is it where the aluminium trim meets the wall panel?

If so I used white Sikaflex. That stuff sticks everything provided it's clean..

[mdw]

evostick "Sticks like S**t", White or clear £6 from screwfix. Sticks wet or dry, down to -40 and up to nearly 100 degrees.

[Monkeylegend]

mdw said:

evostick "Sticks like S**t", White or clear £6 from screwfix. Sticks wet or dry, down to -40 and up to nearly 100 degrees.

Might as well use s**t then, a lot cheaper.

[Greg the Fish]

Gorrila glue.

Makes evo stick look like children's PVA

[pits]

mdw said:

evostick "Sticks like S**t", White or clear £6 from screwfix. Sticks wet or dry, down to -40 and up to nearly 100 degrees.

I would guess that it's going to be installed at 90 degrees, so well within operating conditions

[carreauchompeur]

CDB1983 said:

That looks the the same door on on our camp 55. Is it where the aluminium trim meets the wall panel?

If so I used white Sikaflex. That stuff sticks everything provided it's clean..

🤣 First message, spooky

It’s the gas locker door off my Camp 55 that has looked increasingly wobbly so when running the van at its parking spot today I decided to bite the bullet!