Discussion
Hello All.
I've recently bought some OAT coolant from Halfords, the version which need to be diluted
This one: https://www.halfords.com/motoring/engine-oils-and-...
On the Waring label it say to have a maximu of 60% coolant.
Would some one know why?
Jack
I've recently bought some OAT coolant from Halfords, the version which need to be diluted
This one: https://www.halfords.com/motoring/engine-oils-and-...
On the Waring label it say to have a maximu of 60% coolant.
Would some one know why?
Jack
Jack_and_MLE said:
What would be the consequences if the coolant was 100% OAT?
www.midlandslubricants.co.uk/agricultural/agricultural-oils-tractor/tractor-oils-lubricants/midlands-lubricants-long-life-red-anti-freeze/Freezing Point, Undiluted -13°C
Freezing Point, 25% aqueous, (1:3 ratio is antifreeze to water) -16°C
Freezing Point, 33% aqueous, (1:2) -19°C
Freezing Point, 40% aqueous, (1:1.5) -24°C
Freezing Point, 50% aqueous, (1:1) -36°C
Think there may also be heat dissipation issues if undiluted but I stand to be corrected!
I can confirm heat dissipation issues with neat antifreeze: I filled up a car from a drum marked (with a marker pen) 50/50 mix. At first I could not understand why the cooling fan was running so much more than usual. It turns out that the drum had been half filled with neat antifreeze but the water had not been added. Once the coolant was replaced with a 50/50 mix the fan went back to normal operation. The specific heat capacity of ethylene glycol is lower than that of water so the coolant gets hotter from the engine’s heat and the fan spends more time running to try and pass enough air through the radiator.
paintman said:
www.midlandslubricants.co.uk/agricultural/agricult...
Freezing Point, Undiluted -13°C
Freezing Point, 25% aqueous, (1:3 ratio is antifreeze to water) -16°C
Freezing Point, 33% aqueous, (1:2) -19°C
Freezing Point, 40% aqueous, (1:1.5) -24°C
Freezing Point, 50% aqueous, (1:1) -36°C
Think there may also be heat dissipation issues if undiluted but I stand to be corrected!
Every days a school day...never knew that....Freezing Point, Undiluted -13°C
Freezing Point, 25% aqueous, (1:3 ratio is antifreeze to water) -16°C
Freezing Point, 33% aqueous, (1:2) -19°C
Freezing Point, 40% aqueous, (1:1.5) -24°C
Freezing Point, 50% aqueous, (1:1) -36°C
Think there may also be heat dissipation issues if undiluted but I stand to be corrected!
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff


