antenna co-ax problem

[Aerodynamik]

Hi all

I've just replaced the tailgate on my 2017 Peugeot 3008 am a little very confused about the co-ax connectors, something which I thought would be the easy bit!

There are three identical co-ax cables going to the boot (this is new to me as it always used to be one) and each is about 3mm thick. They are joined by three plastic connectors which are orange, grey and white. The trouble is on the replacement boot the cables were cut so I don't know which went to which connector. I assume they all go to antennas in the rear windscreen.

I've tried connecting the wires using a bit of tape which I thought would give me a bit of a signal to indicate which went where but I'm getting no signal.

My main questions are:

The co-axs are marked LEONI Dacar(R) 300S-KOAX-B(105)-50-1-5-2,8. Presumably somewhere amongst this is the type of co-ax?

Can any wire go to any connector?

I guess I will need new connectors, does anyone which type?

TIA Steve

[spikeyhead]

Cable info here, but there'll be 11,873 different connectors that would work with that cable

https://publications.leoni.com/fileadmin/automotiv...

[Chris32345]

At a guess am/FM dab and GPS Hence the need for 3 cables