Nissan Juke ECU
Author
Discussion

pkgreen60

Original Poster:

5 posts

164 months

Friday 7th April 2023
quotequote all
Has anybody had to replace the ECU/Engine control unit on their Generation 1 Nissan Juke.
Can you tell me if you can fit a second hand unit, and does it have to be recoded to suit the car you’re fitting it to?
Any information would be mostly appreciated
My car is F15 petrol Teckna 1.6 2013

E-bmw

13,442 posts

182 months

Friday 7th April 2023
quotequote all
Don't have any experience of that exact car, but a car of that age I would expect to have to be coded to the car.

Last one I changed was an r53 mini & that needed coding to the car & was 10 years older than yours.

Yazza54

20,331 posts

211 months

Friday 7th April 2023
quotequote all
It'll need to be either coded or the immobiliser removed completely for a car of that age. Bigger question is why?

pkgreen60

Original Poster:

5 posts

164 months

Friday 7th April 2023
quotequote all
I have a juke digit F15 petrol AWD 2013 car, it is great when you start up and drive about 1/2 mile, it then goes into a loss of power mode and struggles to reach 10 mph. I took it for diagnostic test and the CVT sensors were showing errors, so I took it to a transmission company for diagnosis. The gearbox required full reconditioning. This was done, but the fault of loss of engine power is still there and prevents programming of the gearbox.
Has anyone had this kind of engine problem, and how did you manage to find or repair the problem.