polish,what is the BEST for black
Discussion
My bike is black,and I'm a complete fanatic about getting the best shine POSSIBLE.
But,using my usual technique,I'm getting a very fine smear when looking at the surface when light bounces of it.From most angles its a deep,glossy black,but in certain light it, at times, looks cack...
any advice ?,only the most anal of perfectionists may reply !! , as the bike IS very,VERY shiny already!,normal people ( friends and family ) think it cant get any better,I know it can..!! heh
cheers
But,using my usual technique,I'm getting a very fine smear when looking at the surface when light bounces of it.From most angles its a deep,glossy black,but in certain light it, at times, looks cack...
any advice ?,only the most anal of perfectionists may reply !! , as the bike IS very,VERY shiny already!,normal people ( friends and family ) think it cant get any better,I know it can..!! heh
cheers
Most of the resin based polishes (eg: Autoglym etc) are useless on dark colours as they leave the residue that you are seeing from certain angles. One method is to use a microfibre cloth (eg: e-Cloth) to get rid of the smears, but it's not perfect. Autoglym have just released a new polish called 'Ultra Deep Shine' which is aparrently better suited to dark coloured cars (or bikes I guess).
If you really want to step it up a grade, try P21S's products.
If you really want to step it up a grade, try P21S's products.
For the best 'shine' I don't think you will beat a Carnuaba wax; one of the best for black is a product known as Pinnacle Souveran; below is a link to a dark metallic and the results achieved:
http://autopia.org/forums/showthread.php?s=1d7f82751a4f6e1d753e77bd890d1223&threadid=43535&highlight=souveran+black
However, the key thing to remember is that it is preparation of the surface that determines the shine, not the wax (although that is a factor; they are not all the same). This means removing any embedded debris with clay, and polishing to remove swirl marks and spider webbing etc.
Regards
http://autopia.org/forums/showthread.php?s=1d7f82751a4f6e1d753e77bd890d1223&threadid=43535&highlight=souveran+black
However, the key thing to remember is that it is preparation of the surface that determines the shine, not the wax (although that is a factor; they are not all the same). This means removing any embedded debris with clay, and polishing to remove swirl marks and spider webbing etc.
Regards
Zymol, Swissol, Maguires, Zaino depending on budget.
Large amounts of bullshit marketing on this type of product so up to you what you think is a reasonable spend.
Don't buy the cheap zymol halfords sell, its crap. You need the proper range if you get there stuff. As mentioned above you also need to get the microfibre clothes & applicators etc as they are half the secret.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





