Oil...for a petrol lawnmower....
Oil...for a petrol lawnmower....
Author
Discussion

tvradict

Original Poster:

3,829 posts

305 months

Saturday 12th April 2003
quotequote all
Long story, but some years ago some daft muppet filled my dads lawnmower with petrol before cutting the grass. Sounds ok u say. But she put it in the oil filler

Now, after 4 years, I have got hold of said lawnmower and dried it out.

Now all I need to do is put some oil in it, paint it, and it'll be good as new.

Question,
Whats the oil? Engine is a Briggs and Stratton 3.5hp 4 cycle (). Somebody said 20 40 would do the job. Is that ok?

TIA

UMAR B

1,484 posts

298 months

Saturday 12th April 2003
quotequote all
go to Halfords, Don't have to ask the shelf stakers but they have lawn mower oil on the shelf. Check the castrol booklet for application

Hope that helps

Umar B (ex Halffords Shelf stacker )

tvradict

Original Poster:

3,829 posts

305 months

Saturday 12th April 2003
quotequote all
Cheers Umar.

Working in Halfords does have it's advantages

DennisTheMenace

15,605 posts

299 months

Saturday 12th April 2003
quotequote all
i just chuck what ever oil i put in the car in the mower , hasent complained yet run it on optimax though , and the strimmer

UMAR B

1,484 posts

298 months

Saturday 12th April 2003
quotequote all

tvradict said: Cheers Umar.

Working in Halfords does have it's advantages


The problem was nobody told me what they were .

>> Edited by UMAR B on Saturday 12th April 16:52

cazzo

16,561 posts

298 months

Sunday 13th April 2003
quotequote all

Question,
Whats the oil? Engine is a Briggs and Stratton 3.5hp 4 cycle ().



I'm in the middle of an engine rebuild at the moment on a B & S 8hp, which will be virtually the same thing - only bigger, Manual says "in summer use SAE 30, in winter use SAE 5W-20" but it ain't no Ferrari I use whatever is in the garage (maybe that's why it needs a rebuild?).

Anyway check out www.briggsandstratton.com they have FAQ and an email support line.


Edited to add this page tells all...www.briggsandstratton.com/MainSite.asp?CategoryID=7&lrID=1&ParentID=7&MSCSSID=1234&MB=&EPAGE=/main/RealBriggs/WebSite/NA/EN/support_maintenance/maintenance/oil_type.mb&l=0


>> Edited by cazzo on Sunday 13th April 23:02

wedg1e

27,044 posts

296 months

Monday 14th April 2003
quotequote all
So... did the lawnmower ever start with a crankcase full of petrol...?

I've just bought a petrol strimmer 'cos my garden grows like wildfire and I keep expecting to trip over David's Bellamy and Attenborough comparing notes behind the garage.
Ye olde Qualcast 'Concorde' (surely the least apposite name ever given to a piece of kit? Almost as daft as Microsoft Works) takes one look and shits itself, in a lawnmowery-shitty kind of way. Hence the need to don PPE and attack the scenery with 25cc of JapAmericItalian 'finest' :ahem:.
Alas they must have forgotten to put balance webs on the crankshaft 'cos the vibration is enough to shake your hands off. You know how they recommend lying on your arm for an hour before w***ing, so it feels like someone else is doing it? Well this must be a close second. I tried using a neck strap, but all that happens is my fillings loosen. I'm sure me Julie would be ecstatic if I installed it under the sofa, but as far as the user-friendliness of modern power tools goes, it'll be pushing insurance claims for Vibration White Finger into orbit.

Ian

McNab

1,627 posts

305 months

Monday 14th April 2003
quotequote all
Ian, it shouldn't do that! What does the book say? Mine uses 25:1 unleaded/oil, but they all use different ratios, so check it out.

The one thing that kills strimmers and Flymos stone dead is 'Two-Stroke' mix from filling stations.

Do yourself a favour and buy some 'Oregon Oil' from a specialist mower firm. Red stuff. Mix it with unleaded, ratio per your instruction book, then rev the nuts off it.

If it disintegrates there must be something wrong somewhere.....


P.S. Stuart, SAE 30 from any Garden Machinery firm.

>> Edited by McNab on Monday 14th April 03:08