ISO 9000 - anyone got a copy?
Discussion
Control Procedures:
Develop procedures to ensure that your measurement equipment is appropriate, effective, and secure. Your procedures should specify:
What kinds of measurements must be made.
What kinds of measurement methods must be used.
How accurate these measurements should be.
Which quality measurement equipment should be used.
What kinds of environmental conditions are suitable.
How and where your equipment should be stored.
How equipment will be protected from harm.
Develop procedures to calibrate all of your quality oriented inspection, measuring, and test equipment. Your procedures should ensure that:
Calibration methods are clearly defined.
Equipment is calibrated on a regular basis.
Equipment calibration status is clearly shown.
Calibration acceptance criteria are clearly specified.
Equipment is calibrated against official standards.
Calibrations are carried out in a suitable environment.
Calibration documents and records are maintained.
Calibration records are accurate and up-to-date.
Appropriate remedial actions are taken whenever
calibration results are found to be unacceptable.
Valid calibration settings are protected from
unauthorized adjustment.
Previous calibration results are rechecked whenever
equipment is found to be out-of-calibration.
Develop procedures to calibrate hardware and tools
used to test and validate your software products.
...Got this off the world wide wait though...
Matt.
Develop procedures to ensure that your measurement equipment is appropriate, effective, and secure. Your procedures should specify:
What kinds of measurements must be made.
What kinds of measurement methods must be used.
How accurate these measurements should be.
Which quality measurement equipment should be used.
What kinds of environmental conditions are suitable.
How and where your equipment should be stored.
How equipment will be protected from harm.
Develop procedures to calibrate all of your quality oriented inspection, measuring, and test equipment. Your procedures should ensure that:
Calibration methods are clearly defined.
Equipment is calibrated on a regular basis.
Equipment calibration status is clearly shown.
Calibration acceptance criteria are clearly specified.
Equipment is calibrated against official standards.
Calibrations are carried out in a suitable environment.
Calibration documents and records are maintained.
Calibration records are accurate and up-to-date.
Appropriate remedial actions are taken whenever
calibration results are found to be unacceptable.
Valid calibration settings are protected from
unauthorized adjustment.
Previous calibration results are rechecked whenever
equipment is found to be out-of-calibration.
Develop procedures to calibrate hardware and tools
used to test and validate your software products.
...Got this off the world wide wait though...
Matt.
Another version:
Control Procedure - 4.11.2
Camco:
a) Determines the measurements to be made and the accuracy required, and selects the appropriate inspection, measuring and test equipment that is capable of the necessary accuracy and precision;
b) Identifies all inspection, measuring and test equipment that can affect product quality, and calibrates and adjusts them at prescribed intervals, or prior to use, against certified equipments having a known valid relationship to internationally or nationally recognized standards. Where no such standards exist, the basis used for calibration is documented;
c) Defines the process employed for the calibration of inspection, measuring and test equipment, including details of equipment type, unique identification, location, frequency of checks, check method, acceptance criteria and the action to be taken when results are unsatisfactory;
d) Identifies inspection, measuring and test equipment with a suitable indicator or approved identification record to show the calibration status;
e) Maintains calibration records for inspection, measuring and test equipment (see 4.16) ;
f) Assesses and documents the validity of previous inspection and test results when inspection, measuring or test equipment is found to be out of calibration;
g) Ensures that the environmental conditions are suitable for the calibrations, inspection, measurements and tests being carried out;
h) Ensures that the handling, preservation and storage of inspection, measuring and test equipment is such that the accuracy and fitness for use is maintained;
I) Safeguards inspection, measuring and test facilities, including both test hardware and test software, from adjustments which would invalidate the calibration setting.
Control Procedure - 4.11.2
Camco:
a) Determines the measurements to be made and the accuracy required, and selects the appropriate inspection, measuring and test equipment that is capable of the necessary accuracy and precision;
b) Identifies all inspection, measuring and test equipment that can affect product quality, and calibrates and adjusts them at prescribed intervals, or prior to use, against certified equipments having a known valid relationship to internationally or nationally recognized standards. Where no such standards exist, the basis used for calibration is documented;
c) Defines the process employed for the calibration of inspection, measuring and test equipment, including details of equipment type, unique identification, location, frequency of checks, check method, acceptance criteria and the action to be taken when results are unsatisfactory;
d) Identifies inspection, measuring and test equipment with a suitable indicator or approved identification record to show the calibration status;
e) Maintains calibration records for inspection, measuring and test equipment (see 4.16) ;
f) Assesses and documents the validity of previous inspection and test results when inspection, measuring or test equipment is found to be out of calibration;
g) Ensures that the environmental conditions are suitable for the calibrations, inspection, measurements and tests being carried out;
h) Ensures that the handling, preservation and storage of inspection, measuring and test equipment is such that the accuracy and fitness for use is maintained;
I) Safeguards inspection, measuring and test facilities, including both test hardware and test software, from adjustments which would invalidate the calibration setting.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff




