RE: Video: Bentley Mulsanne Gets Paint
RE: Video: Bentley Mulsanne Gets Paint
Monday 15th March 2010

Video: Bentley Mulsanne Gets Paint

Official video showcases the latest Bentley's lustrous finish



The problem with automotive factory tours these days is that you hardly ever get near the paint shop.

That’s a shame, because turning the body-in-white into a beautifully finished piece of automotive art is arguably one of the most interesting parts of the build process.

The reason car makers don't usually let visitors get close up and personal is twofold – they don’t want your stray hair, dandruff, pocket fluff or paw prints on their pristine panels, and they don’t want you to sue them for lung damage from any microscopic particles you may inhale if you venture into the paint shop unprotected.

While the Bentley paint shop in Crewe may not be as technically advanced as robotised mass-production plants, the skills of the guys spraying paint by hand are second to none. There are some fascinating insights into the painting process in the press release that accompanied this video - you can read it below.

Meanwhile, if you own a Bentley, just remember it's a matter of respect to keep it polished!

Click 'play' above to view

Official Bentley Press Release:

Exacting standards of craftsmanship and technology are employed by Bentley’s body assembly team to create the new Mulsanne’s distinctive, hand-crafted ‘hewn from solid’ appearance. But this is just a precursor to the painstaking attention to detail afforded to Bentley’s new 4-door flagship in the paint facility at the company’s headquarters in Crewe, England.

The new Mulsanne will be offered in no fewer than 115 ‘standard colours’ and that is just the start of the story – because, like every grand Bentley – the only real limit on the colour of the car is the customer’s imagination.

Once the bare metal, pre-production Mulsanne bodyshell arrives at the paint shop via the automated overhead gantry, it passes through a series of full-immersion tanks, designed first to de-grease, then in turn to clean, condition, rinse, phosphate and passivate the steel and aluminium structure.

At each tank the shell is immersed before being tipped fore and aft to ensure that every single crevice is reached. Once drained, the bodyshell is lowered into an electro-coating tank, where power is increased to 320 volts, attracting particles-in-solution which deposit on the charged, metal bodywork to form, in conjunction with the phosphate, a hard protective shell of corrosion-proof zinc primer. 

From this point, the judgement and skill of Bentley’s craftsmen come to the fore. A two-coat primer is applied by hand, ready for the colour-of-choice to be applied. Each primed body is minutely inspected, sanded – or flatted – using a combination of hand and power tools. Only when the primer coat is flawless will the colour basecoat be applied, again by hand, to achieve the optimum finish. Clear lacquer coats are then applied robotically followed by final polishing for a perfectionist finish and detailed inspection in the specialist bays created for the Mulsanne.

But if the lacquer can be applied by robotics, why not the colour? Dave Walton of the Mulsanne bespoke paint shop explains:

“Different colours have markedly different characteristics and your perception of a colour’s shade changes according to how deep the coat is. Then there’s the fact that no two expert sprayers would apply that colour basecoat in exactly the same way. You learn to trust each craftsman’s eyes and skills, not just the process.

"It takes many months of in-depth training for a quality control inspector to learn how to identify defects that an owner might never notice, yet each one will be rectified, even if this means sending it around the entire process again. We always operate way above customer expectations of quality.”  

With the introduction of new satin paint finishes and two-tone colour schemes to Bentley’s extensive portfolio, Walton says the skills of the team are always evolving. Satin in particular can’t be locally reworked and polished, so even the most miniscule imperfection means the entire panel is refinished.

However, Bentley’s craftsmen are eagerly awaiting the moment the Mulsanne goes into full production according to Walton:

“We’ve been asked to match a paint finish to a cherished nail polish, a 50-year old classic Bentley and on one occasion a shade of turquoise on a food mixer for our Arnage, Brooklands and Azure customers. But even with over a hundred ‘standard colours’ to choose from we’re still looking forward to that first commission to create a bespoke colour from scratch and execute it perfectly.”

Author
Discussion

ArtVandelay

Original Poster:

6,692 posts

215 months

Monday 15th March 2010
quotequote all
Video isn't working at the moment, youtube says it is being processed.

Not a massive fan of the car, looks a bit awkward from most angles but then again I'm not their target demographic (20 year old skint student)

After watching Mega Factories the other night on how the R.R Phantom is built, I wonder how this compares. The amount of work going into the Phantom was astonishing and required plenty of skilled workers, including the paint shop.

AndrewW-G

11,968 posts

248 months

Trommel

20,667 posts

290 months

Monday 15th March 2010
quotequote all
ArtVandelay said:
The amount of work going into the Phantom was astonishing and required plenty of skilled workers, including the paint shop.
I've been to the Rolls Royce factory and they're painted by robots. The whole section is automated.

teen_cerbera

7,927 posts

256 months

Monday 15th March 2010
quotequote all
Trommel said:
ArtVandelay said:
The amount of work going into the Phantom was astonishing and required plenty of skilled workers, including the paint shop.
I've been to the Rolls Royce factory and they're painted by robots. The whole section is automated.
I think he means the polishing and paint prep that happens after the paint has been robotically applied.

I seen the Mega Factories program too, you just have to love Rolls Royce & everything they stand for.

I hate this Bentley, such an ugly car frown

Andrew[MG]

3,360 posts

229 months

Monday 15th March 2010
quotequote all
When you see the amount of chemicals they use in the painting process it's amazing how anyone belives the 'buy a new car and save the world from the scary CO2' message.

I'd like them to paint and polish my car smile

soad

34,769 posts

207 months

Monday 15th March 2010
quotequote all
Good stuff - enjoyed watching that, never been on a production line myself so interesting to see the process of it.

peteA

2,762 posts

265 months

Monday 15th March 2010
quotequote all
always suprises me how the paint is not damaged as the car passes it way down the production line....when you think how many things have to go in and be attached by numerous people....then theres testing and delivery, etc...impressive.

Also not a fan of the cars looks however I like it more now than I did when I first saw it but not sure why?

Gixer_fan

290 posts

229 months

Monday 15th March 2010
quotequote all
Never mind if you love or hate the car - it's just good to see that we're maintaining some British craftsmanship..

edinph

387 posts

205 months

Monday 15th March 2010
quotequote all
The chap who valets my lowly Merc trained at Bentley and he is a master of the art! I love watching him work. And my now 5yr old CLK still looks new.

No 1

232 posts

281 months

Monday 15th March 2010
quotequote all
I love Rolls and Bently and everything they [used to] stand for, but it seems a shame to waste this effort on such an ugly car!


edinph said:
The chap who valets my lowly Merc trained at Bentley and he is a master of the art! I love watching him work. And my now 5yr old CLK still looks new.
Where do you get your car valetted?


Fat Audi 80

2,403 posts

282 months

Monday 15th March 2010
quotequote all
edinph said:
The chap who DETAILS my lowly Merc trained at Bentley and he is a master of the art! I love watching him work. And my now 5yr old CLK still looks new.
EFA

smile

Balmoral Green

42,561 posts

279 months

Monday 15th March 2010
quotequote all
I wish they had gone to that level of detail twenty years ago, the old buses really rot, even if looked after. The bread & butter cars of the day (even a Ford Escort) had much better corrosion protection. All that craftsmanship and attention to detail, let down by tin worm.

Andrew[MG]

3,360 posts

229 months

Monday 15th March 2010
quotequote all
Balmoral Green said:
I wish they had gone to that level of detail twenty years ago, the old buses really rot, even if looked after. The bread & butter cars of the day (even a Ford Escort) had much better corrosion protection. All that craftsmanship and attention to detail, let down by tin worm.
Hope yours is still going strong!?!

Balmoral Green

42,561 posts

279 months

Monday 15th March 2010
quotequote all
It certainly is, apart from a bit of rot breaking through hehe

Despite the stupidly expensive repaint and new metal let in a few years back grumpy

infradig

978 posts

238 months

Monday 15th March 2010
quotequote all
Balmoral Green said:
It certainly is, apart from a bit of rot breaking through hehe

Despite the stupidly expensive repaint and new metal let in a few years back grumpy
You're a better man than me,I gave up when the bubbles reappeared on the bottoms of my rear wings for the second time in three years-I used to laugh at 'filler and stonechip' Bentleys now I find it almost forgivable.

MAD63

47 posts

203 months

Monday 15th March 2010
quotequote all
The English have always been the masters at getting a first class finish on a car,It must be the weather. But it begs the question.." it's a lot of effort to put into a volkswagon isn't it?"

T0M

750 posts

208 months

Monday 15th March 2010
quotequote all
and then some tt goes and opens their door on it... frown

Kawasicki

14,428 posts

266 months

Tuesday 16th March 2010
quotequote all
MAD63 said:
The English have always been the masters at getting a first class finish on a car,It must be the weather. But it begs the question.." it's a lot of effort to put into a volkswagon isn't it?"
The Mulsanne is not based on a VW.

Tadite

560 posts

215 months

Tuesday 16th March 2010
quotequote all
Kawasicki said:
MAD63 said:
The English have always been the masters at getting a first class finish on a car,It must be the weather. But it begs the question.." it's a lot of effort to put into a volkswagon isn't it?"
The Mulsanne is not based on a VW.
I thought it was?

Not that this is the major problem with it. It is amazingly uglyfrown.

Balmoral Green

42,561 posts

279 months

Wednesday 17th March 2010
quotequote all
Kawasicki said:
MAD63 said:
The English have always been the masters at getting a first class finish on a car,It must be the weather. But it begs the question.." it's a lot of effort to put into a volkswagon isn't it?"
The Mulsanne is not based on a VW.
Indeed, it's a proper Rolls Royce through and through.

There are currently 14 models, 8 are VAG and 6 are Rolls Royce's.

As & when they build a completely new car, that carries over nothing from the Rolls Royce past, and neither shares/borrows from VAG, then it will be a Bentley.

It's great that you can still get new proper Rolls Royce's though, albeit it Bentley branded tongue out

Edited by Balmoral Green on Wednesday 17th March 09:39