Wheel Wobble?!
Discussion
Thought I would consult the PH masses on this issue! I have got a rather big wheel wobble when I get to around 60 MPH and above. I have had the wheels balanced and they are all fine now. Could this be warped disks? I'm not sure, as the wheel doesn't wobble under braking, just on reasonably straight road above 60 ish like I said!
Can anybody shed some light on this situation? Cheers, Alex
Can anybody shed some light on this situation? Cheers, Alex
Had this a few years ago, had a terrible vibration had wheels balanced it didnt go away. Then one day I parked in a gravel car park and saw a strange raised area outlined in dust on one back tyre. The damn tyre had warped and when i checked the other rear tyre was going the same way. Last time I will ever have Pirellis on a car of mine.
Either a dodgy wheel repair or a buggered tyre.
Balancing a tyre works up to the speed the balancing machine spins at.
Put the fronts on the back and see if it gets any better - if it is the wheel out of balance this should make it better.
Rotate in the spare.
When no wobble take offending wheel to a proper tyre company and get them to investigate.
Experience - 2003 Saab at 80mph plus was impossible to see out of the thing.
One new wheel required.
Balancing a tyre works up to the speed the balancing machine spins at.
Put the fronts on the back and see if it gets any better - if it is the wheel out of balance this should make it better.
Rotate in the spare.
When no wobble take offending wheel to a proper tyre company and get them to investigate.
Experience - 2003 Saab at 80mph plus was impossible to see out of the thing.
One new wheel required.
HereBeMonsters said:
I have a similar issue on my 205 diesel. Had the wheels balanced by two different places now, and no difference.
I find it's worse under acceleration as well. No idea what it could be.
I had two 205 Gtis that had this problem. It turned out to be that the spigot rings which held the wheels central on the hubs had broken and gone all egg shaped. I find it's worse under acceleration as well. No idea what it could be.
Syndrome said:
HereBeMonsters said:
I have a similar issue on my 205 diesel. Had the wheels balanced by two different places now, and no difference.
I find it's worse under acceleration as well. No idea what it could be.
I had two 205 Gtis that had this problem. It turned out to be that the spigot rings which held the wheels central on the hubs had broken and gone all egg shaped. I find it's worse under acceleration as well. No idea what it could be.
Thanks for all the help and advice guys! The wheels have all been balanced by Ford themselves, so I'm pretty sure they're fine. I have checked all the bolts are nice and tight this evening. I have now come to the conclusion that my offside rear has a camber issue. The tyre on that side has been worn heavily on the inside of the wheel, but hardly at all on the outside. All the other tyres are evenly worn.
I think it's time to take a trip down to Ford!
I think it's time to take a trip down to Ford!
Brake discs don't warp.
I've never seen a brake disc that has warped in my life and know many mechanics who will say the same.
The symptoms of a "warped disc" show up when braking as a pulsing of the brakes or a wobble in the wheel. This is caused by pad material deposited upon the surface of the disc. This acts like a wheel balancing weight and throws the wheel out of balance. No amount of wheel balancing will stop it.
To avoid pad material being deposited on your discs avoid heavy braking to a complete stop. If you must, as soon as you stop release the foot brake but don't apply the handbrake (this can also deposit its shoe material inside the handbrake drum) if the car wants to roll let it for a second then pull the car up again, don't sit on the brakes.
If you have new discs and deposit pad material then you can remove it with an angle grinder and "garnet" discs. Normal discs will deposit carborundum onto the disc and leave you back at square one.
I've never seen a brake disc that has warped in my life and know many mechanics who will say the same.
The symptoms of a "warped disc" show up when braking as a pulsing of the brakes or a wobble in the wheel. This is caused by pad material deposited upon the surface of the disc. This acts like a wheel balancing weight and throws the wheel out of balance. No amount of wheel balancing will stop it.
To avoid pad material being deposited on your discs avoid heavy braking to a complete stop. If you must, as soon as you stop release the foot brake but don't apply the handbrake (this can also deposit its shoe material inside the handbrake drum) if the car wants to roll let it for a second then pull the car up again, don't sit on the brakes.
If you have new discs and deposit pad material then you can remove it with an angle grinder and "garnet" discs. Normal discs will deposit carborundum onto the disc and leave you back at square one.
alexpye1989 said:
Thanks for all the help and advice guys! The wheels have all been balanced by Ford themselves, so I'm pretty sure they're fine. I have checked all the bolts are nice and tight this evening. I have now come to the conclusion that my offside rear has a camber issue. The tyre on that side has been worn heavily on the inside of the wheel, but hardly at all on the outside. All the other tyres are evenly worn.
I think it's time to take a trip down to Ford!
Doesn't matter who balanced themI think it's time to take a trip down to Ford!
They are only balanced up to the max speed of the balancing machine.
99.9% of the time this is enough.
Your offside rear should not cause a wheel wobble with just the camber out.
Have you jacked up the car and seen if there is any play on that wheel?
You'd be better going to specialist with "Hunter" equipment.
get alignmemnt sorted - camber and toe etc
get balancing done - drive
if no good get balancing done whilst wheels are on - drive
if no good its likely you have a buckled wheel - sue the council for not repairing the potholes
For me regardless of whether you go to a main dealer, seeing someone who has the right kit and only deals with wheels/tyres far outweighs the badge over the door and the increased labour rate...
get alignmemnt sorted - camber and toe etc
get balancing done - drive
if no good get balancing done whilst wheels are on - drive
if no good its likely you have a buckled wheel - sue the council for not repairing the potholes
For me regardless of whether you go to a main dealer, seeing someone who has the right kit and only deals with wheels/tyres far outweighs the badge over the door and the increased labour rate...
Could be bushes in the suspension failing - I learnt this one on E36s where the rear bush on the front track control arm wears out and it feels like wheel balance, and worse under high speed braking. And then at the back, you get a clonk over bumps (probably not finished off at all by the previous day's sideways laps of my private roundabout
).
As you say there's camber issues at the back, that's where I'd be looking.
NB, the rubber will look OK visually, you need to jack up the car and start moving stuff, probably with a pry bar
).As you say there's camber issues at the back, that's where I'd be looking.
NB, the rubber will look OK visually, you need to jack up the car and start moving stuff, probably with a pry bar
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff


