Sherpa Van Manual???? Dont Laugh!
Sherpa Van Manual???? Dont Laugh!
Author
Discussion

focusboy

Original Poster:

274 posts

221 months

Wednesday 17th March 2010
quotequote all
Evening all, Having trouble trying to remove a steering box from an old Sherpa camper, Would anybody have a diagram for the steering box at all? Have undone all the bolts i can see but yet the box will not detach itself away from the chassis, Is there something i have likey to have missed?

Scrapping it is not an option haha.

Many thanks Garry

theironduke

6,995 posts

219 months

Wednesday 17th March 2010
quotequote all
Is it a V8 propelled sherpa....? with straight through exhausts....?

jamiebae

6,245 posts

242 months

Wednesday 17th March 2010
quotequote all
Is it the same system as the MGB? Might be worth a look.

Robert060379

15,754 posts

214 months

Wednesday 17th March 2010
quotequote all
Have you tried hitting it with a hammer? That's the only way we could get the one off the Van of Death.

bazking69

8,620 posts

221 months

Wednesday 17th March 2010
quotequote all
Another vote for some gentle persuation. It has been in situ since the world became round!

As for a workshop manual, you'll probably need a microfiche reader!!

focusboy

Original Poster:

274 posts

221 months

Wednesday 17th March 2010
quotequote all
So buying a bigger hammer may help?

morgrp

4,128 posts

229 months

Wednesday 17th March 2010
quotequote all
Have you tried the Austin Rover Online forum? prob be more fruitful than on here

dudleybloke

20,553 posts

217 months

Wednesday 17th March 2010
quotequote all
focusboy said:
So buying a bigger hammer may help?
either a bigger hammer or bigger muscles!

davepoth

29,395 posts

230 months

Wednesday 17th March 2010
quotequote all
I would suggest a bigger hammer. And more swearing.

HiRich

3,337 posts

293 months

Thursday 18th March 2010
quotequote all
IIRC, it's an interference fit through the longmember, installed with a hydraulic ram. Quite why, I could not tell. You might get lucky by mking an appropriately sized drift, and ideally it needs an extractor tool (or something juewry-rigged with G-clamps or a press) rather than a lumphammer.