Why do my brakes squeek?
Why do my brakes squeek?
Author
Discussion

Tiggsy

Original Poster:

10,261 posts

283 months

Wednesday 17th March 2010
quotequote all
Last autum i replaced the front discs and pads on my clio - all went well.

This last week they have started to squeek in the last few seconds as the car pulls up to a stop...why would that be? Loads of life on the pads. Any easy fix...it's for sale and sounds naff! (Wd40 on the brake discs is a no i assume smile )

Flanders.

6,442 posts

239 months

Wednesday 17th March 2010
quotequote all
Mine do the same. I've even shouted at them and it didn't work hehe.

bazking69

8,620 posts

221 months

Wednesday 17th March 2010
quotequote all
Non genuine parts per chance?

kdempsie

120 posts

200 months

Wednesday 17th March 2010
quotequote all
This pad noise is caused by dust getting behind the pads. If you take the pads out, clean them and the calipers. Then reassemble making sure you use copperslip to lubricate the back of the pads the noise should go away.

klimakool

592 posts

206 months

Wednesday 17th March 2010
quotequote all
sorry to say but its partly due to bad driving. the reason for the squeeking is a dust build up embedded into the kevlar in the brake pad surface, mainly due to two things, damp conditions and (the bad driving part) braking on corners. braking on corners stops the deflected air to cool the brakes down doing its job and the dust isnt blown away. all cars have some sort of method to help cool the brakes down and on renaults its usually a part of the bumper that deflects the air into the archway. easily fixed though, just some emmery cloth and rub the 'shine' off of the pads and you'll be back to normal. also the rock salt the council use in this country is really poor quallity and i no way helps with this issue either

hope this helps

hornetrider

63,161 posts

236 months

Wednesday 17th March 2010
quotequote all
klimakool said:
sorry to say but its partly due to bad driving. the reason for the squeeking is a dust build up embedded into the kevlar in the brake pad surface, mainly due to two things, damp conditions and (the bad driving part) braking on corners. braking on corners stops the deflected air to cool the brakes down doing its job and the dust isnt blown away. all cars have some sort of method to help cool the brakes down and on renaults its usually a part of the bumper that deflects the air into the archway. easily fixed though, just some emmery cloth and rub the 'shine' off of the pads and you'll be back to normal. also the rock salt the council use in this country is really poor quallity and i no way helps with this issue either

hope this helps
FPMSL.

klimakool

592 posts

206 months

Wednesday 17th March 2010
quotequote all
FPMSL????

Tiggsy

Original Poster:

10,261 posts

283 months

Wednesday 17th March 2010
quotequote all
klimakool said:
FPMSL????
Flipping pee myself laughing?


So no quick fix then.....need to strip the pads out? Jet wash on the caliper wont help? Only need to fix it for a week!

Pcot

863 posts

213 months

Wednesday 17th March 2010
quotequote all
klimakool said:
FPMSL????
fking pissing my self laughing

Westy Pre-Lit

5,088 posts

234 months

Wednesday 17th March 2010
quotequote all
To stop the squeeking I suggest folding the rear seats down....works for me.

Petrolhead747

176 posts

223 months

Wednesday 17th March 2010
quotequote all
hornetrider said:
klimakool said:
sorry to say but its partly due to bad driving. the reason for the squeeking is a dust build up embedded into the kevlar in the brake pad surface, mainly due to two things, damp conditions and (the bad driving part) braking on corners. braking on corners stops the deflected air to cool the brakes down doing its job and the dust isnt blown away. all cars have some sort of method to help cool the brakes down and on renaults its usually a part of the bumper that deflects the air into the archway. easily fixed though, just some emmery cloth and rub the 'shine' off of the pads and you'll be back to normal. also the rock salt the council use in this country is really poor quallity and i no way helps with this issue either

hope this helps
FPMSL.
Absofkinlutely

klimakool

592 posts

206 months

Wednesday 17th March 2010
quotequote all
soaking the pads will quieten the noise down untill the heat removes all the water, but you will suffer a little bit poorer braking but hardly noticable till your taking serious power cars

ndg

583 posts

268 months

Wednesday 17th March 2010
quotequote all
Brake squeal comes from the resonance of the brake disc in concert with the pad. Pad material, leading and trailing edge ramp angles, disc structure all have an affect. Non-genuine parts will NOT be designed with all of these parameters optimised. That said I almost always fit aftermarket stuff from GSF.

Manufacturers spend literally months tuning this for each model, if your car is sensitive and you have a tough friction/feel target it can be a real problem. Brembo et al all have test rigs designed purely for testing this stuff.

Back to your problem, copperslip on the back of the pad can help, as can breaking the glaze, but expect it to come back at some point.

N.

hornetrider

63,161 posts

236 months

Wednesday 17th March 2010
quotequote all
Tiggsy said:
klimakool said:
FPMSL????
Flipping pee myself laughing?


So no quick fix then.....
Oh but there is. Follow matey's advice and never brake whilst turning your wheels. Problem solved.

AndrewW-G

11,968 posts

248 months

Wednesday 17th March 2010
quotequote all
klimakool said:
soaking the pads will quieten the noise down untill the heat removes all the water, but you will suffer a little bit poorer braking but hardly noticable till your taking serious power cars
Please tell me thats a joke?................

Robatr0n

12,362 posts

247 months

Wednesday 17th March 2010
quotequote all
klimakool said:
sorry to say but its partly due to bad driving. the reason for the squeeking is a dust build up embedded into the kevlar in the brake pad surface, mainly due to two things, damp conditions and (the bad driving part) braking on corners. braking on corners stops the deflected air to cool the brakes down doing its job and the dust isnt blown away. all cars have some sort of method to help cool the brakes down and on renaults its usually a part of the bumper that deflects the air into the archway. easily fixed though, just some emmery cloth and rub the 'shine' off of the pads and you'll be back to normal. also the rock salt the council use in this country is really poor quallity and i no way helps with this issue either

hope this helps
confused

roflroflroflrofl

Ozzie Osmond

21,189 posts

277 months

Wednesday 17th March 2010
quotequote all
ndg said:
Brake squeal comes from the resonance of the brake disc in concert with the pad. Pad material, leading and trailing edge ramp angles, disc structure all have an affect. Non-genuine parts will NOT be designed with all of these parameters optimised. That said I almost always fit aftermarket stuff from GSF.

Manufacturers spend literally months tuning this for each model, if your car is sensitive and you have a tough friction/feel target it can be a real problem. Brembo et al all have test rigs designed purely for testing this stuff.

Back to your problem, copperslip on the back of the pad can help, as can breaking the glaze, but expect it to come back at some point.
What he said. Disc brakes just love to squeal and manufacturers spend a lot of time and effort tuning it out in the particular application.

richcorsavxr

966 posts

203 months

Wednesday 17th March 2010
quotequote all
corsa vxrs suffer badley from this, we've worked out if you find an empty road drive along and break heavily, it stops the squeakng for a while

Daston

6,154 posts

234 months

Wednesday 17th March 2010
quotequote all
I have noticed that quite alot of the AP racing calipers do this on various TVR's

gary71

2,037 posts

210 months

Wednesday 17th March 2010
quotequote all
Ozzie Osmond said:
ndg said:
Brake squeal comes from the resonance of the brake disc in concert with the pad. Pad material, leading and trailing edge ramp angles, disc structure all have an affect. Non-genuine parts will NOT be designed with all of these parameters optimised. That said I almost always fit aftermarket stuff from GSF.

Manufacturers spend literally months tuning this for each model, if your car is sensitive and you have a tough friction/feel target it can be a real problem. Brembo et al all have test rigs designed purely for testing this stuff.

Back to your problem, copperslip on the back of the pad can help, as can breaking the glaze, but expect it to come back at some point.
What he said. Disc brakes just love to squeal and manufacturers spend a lot of time and effort tuning it out in the particular application.
Also what he said. It's a black art and science mixed all into one smile Even changing the local stiffness of the wheel mounting face can change the frequency of the noise, so swap your alloys and you may give yourself a problem.

Use OEM bits and you'll be as good as it can be, always make sure you use (and properly clean) any self adhesive pads on the back of pads. These stick the pads to the piston, copperslip has much the same effect by stopping the pad vibrating on the end of the piston.