Engine Conversion
Author
Discussion

alexpye1989

Original Poster:

23 posts

211 months

Thursday 18th March 2010
quotequote all
The performance from my current Fiesta ST isn't bad, but it's a little on the slow side! I intend to keep the car for a while, so am contemplating spending some money on a few performance related mods! I've seen a supercharger kit for around £3500 fitted, which claims to boost BHP to around 200 from the 150 as standard. I suddenly thought, how about an engine conversion from the current shape Focus ST, the 2.5 T5 turbo model. Just wondering if this would be at all feasible, and perhaps anywhere which would be willing to do the conversion, if I supplied engine, gearbox, ancillaries etc!

Cheers in advance...

kambites

71,726 posts

252 months

Thursday 18th March 2010
quotequote all
Given that the Focus' engine is an inline five, I wouldn't be at all surprised if it's too long for the Fiesta's engine bay.

Somnophore

1,364 posts

207 months

Thursday 18th March 2010
quotequote all
Someone like Pumabuild would be worth a try.

http://pumabuild.co.uk/

Somnophore

1,364 posts

207 months

s3fella

10,524 posts

218 months

Thursday 18th March 2010
quotequote all
alexpye1989 said:
The performance from my current Fiesta ST isn't bad, but it's a little on the slow side! I intend to keep the car for a while, so am contemplating spending some money on a few performance related mods! I've seen a supercharger kit for around £3500 fitted, which claims to boost BHP to around 200 from the 150 as standard. I suddenly thought, how about an engine conversion from the current shape Focus ST, the 2.5 T5 turbo model. Just wondering if this would be at all feasible, and perhaps anywhere which would be willing to do the conversion, if I supplied engine, gearbox, ancillaries etc!

Cheers in advance...
£3500 for 50hp..........? Not good value IMO. You'd do better with a propoer ported head, a set of cams and possibly some throttle boddies. In this guise you would see over 200hp I'd think and it should be a fair bit cheaper.
If you left the stock injection in and had a god head adn mild cam job, I reckon you should see 190hp and it would be about a £1200 at a guess.

Remember anything you spend on it tuning wise, not only will you not get ti back, but you will probably lose again on the sale of the car vs a stock one, depending on how long you keep it.

If it were me (and at your age I spent loads on tuning cars!) I'd save my cash and look to change to a more powerful car a bit sooner than you may have thought to. A jump to a focus ST will give you a decent performance increase and allow for a futher cheap tune to 270hp+ with a £400 remap.

If you want decent bang per buck on tuning stick to turbos and remaps!

Also remember that if you spend £3500 on a motor conversion, your insurance will increase say 30% and you will pay that for years. Often a stock more powerful car is cheaper to insure than a modified less powerful one, if you see what i mean.

kambites

71,726 posts

252 months

Thursday 18th March 2010
quotequote all
I'd second the "you're better spending money on a better car than on modifying the old one" opinion. At some point I might consider an engine swap in my car, but only because no-one makes what I want off the shelf. There is so much choice in the hot hatch market that I'm sure you'd be better off just buying a faster one.

Edited by kambites on Thursday 18th March 18:25

alexpye1989

Original Poster:

23 posts

211 months

Thursday 18th March 2010
quotequote all
Cheers for the advice guys! I'll have to give Puma a call tomorrow, see what they say.

s3fella-Very helpful. I've gathered from what you've said is that it may be best to keep the car stock for another year, until I hit the 21 year old and 3 years NCB barriers, then upgrade to something quicker with a turbo, that can be easily re-mapped to a higher BHP/torque output. I have been looking at Focus ST's and they are falling slowly into my price bracket, but it's just the insurance at the moment!

Don't get me wrong the Fiesta is a great car, alot of fun around the twisties, but I had expected more power from a relativly light car!

jbi

12,700 posts

235 months

Thursday 18th March 2010
quotequote all
the volvo inline 5 is quite compact and as it is transversely mounted I would imagine it would fit with a bit of jiggling around with the ancillaries.

Somnophore

1,364 posts

207 months

Thursday 18th March 2010
quotequote all
Actually pumaspeed Seem to be more up on ST150 tuning

http://www.pumaspeed.co.uk/category.jsp?makeID=1&a...


The Lukas

2,773 posts

225 months

Thursday 18th March 2010
quotequote all
In cases like these, it's always cheaper and less time consuming to buy a faster car.

stormrider2

658 posts

231 months

Thursday 18th March 2010
quotequote all
Somnophore said:
Actually pumaspeed Seem to be more up on ST150 tuning

http://www.pumaspeed.co.uk/category.jsp?makeID=1&a...
was just away to post this.

£3500 for a supercharger seems like alot for a 50bhp gain.

Pumaspeed is £2999 for a throttle body kit which takes it to 210bhp.

or the better sounding option, the 2.3/2.6 duratec conversion which is 235bhp - 380bhp with small mods apparently

thebigmacmoomin

2,928 posts

200 months

Thursday 18th March 2010
quotequote all
What about a 2.3 Ford Galaxy engine swap?

205jsy

401 posts

205 months

Thursday 18th March 2010
quotequote all
Someone probably makes a turbo kit which will either be cheaper then the supercharger kit or offer more power for the same price. If there is not enough space to fit the 2.5 engine from the st isnt the 2.0 from the original focus rs a 4 cylinder?

pinchmeimdreamin

10,918 posts

249 months

Thursday 18th March 2010
quotequote all
try Fiestastoc.com sister site to the faouc st site,

They will have all the info you require.

Gad-Westy

16,666 posts

244 months

Thursday 18th March 2010
quotequote all
kambites said:
Given that the Focus' engine is an inline five, I wouldn't be at all surprised if it's too long for the Fiesta's engine bay.
Shirley you mean too wide? Its still transverse right, or am I about to learn something new?

Somnophore

1,364 posts

207 months

Thursday 18th March 2010
quotequote all
The 2.3 out of the Galaxy is only 160bhp.

Be better off with the 2.0 ST170 couple of good ones on eBay.

kambites

71,726 posts

252 months

Thursday 18th March 2010
quotequote all
Gad-Westy said:
kambites said:
Given that the Focus' engine is an inline five, I wouldn't be at all surprised if it's too long for the Fiesta's engine bay.
Shirley you mean too wide? Its still transverse right, or am I about to learn something new?
hehe I was defining "length" as the longest dimension of the engine, not of the car.

CloakedBummer

73 posts

200 months

Thursday 18th March 2010
quotequote all
I echo the sentiment of others with the 'leave it alone and buy a faster one.' I've been down the engine swap route many times having no less than 4 engines in one car (one after the other, obviously) its a very expensive process especially when you consider not only the cost of the actual conversion. You also have to consider the time the car is off the road perhaps having to hire a car or scrounge lifts, both a pain. And then there's the cost of running the conversion such as the reduced fuel consumption, insurance hike, potential reduced reliability. On top of that is a reduced resale value, not many people want to buy an already modified car and as such will only appeal to a small sector of drivers.

In short leave it standard, save your dosh and buy something quicker when insurance will allow smile

kambites

71,726 posts

252 months

Thursday 18th March 2010
quotequote all
doogz said:
That's what i was trying to ramble across. Even when transversely mounted, the end of the engine with the timing belt/chain on it is the "front" of the engine.
Yeah I didn't notice your post before I replied smile

Dave^

7,903 posts

284 months

Thursday 18th March 2010
quotequote all
Somnophore said:
The 2.3 out of the Galaxy is only 160bhp.

Be better off with the 2.0 ST170 couple of good ones on eBay.
Not really... The st170 engines don't respond to mods, it'd be easier/cheap to fit induction and exhaust mods to the current engine than fitting the 170 lump...