Urgent help changing oil filter element in 2006 VW polo!!!!!
Urgent help changing oil filter element in 2006 VW polo!!!!!
Author
Discussion

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
Hi all!!

I am in the final stages of servicing the wifes 2006 1.2 polo and of all things the oil filter element is giving me trouble. I have the element container off the car but cannot release the old filter to replace with the new one. There is probably a way to do it but i cant work it outfrown

Can anyone please help ASAP, i am oiled up as i type and ready to go...................but not in a good way!!!!!

Ian

mcford

819 posts

205 months

Thursday 18th March 2010
quotequote all
You usually just pull them off the housing, the new one will snap into the plastic housing.

WhoreLex

3,030 posts

249 months

Thursday 18th March 2010
quotequote all
yeah the paper element should just pull out.

MAKE SURE YOU TORQUE THE PLASTIC FILTER HOUSING TO THE NM INDICATED

I didn't and the emergency pressure valve started leaking oil everywhere

*Al*

3,830 posts

253 months

Thursday 18th March 2010
quotequote all
Ian you obviously must have a replacement oil filter element at hand? Have you not looked to see how it fits? Most just pull out.

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
This is what i have:

jjones

4,492 posts

224 months

Thursday 18th March 2010
quotequote all
how does the cock ring help?

Edited by jjones on Thursday 18th March 19:08

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
jjones said:
how does the cock ring help?

Edited by jjones on Thursday 18th March 19:08
Since i am already oiled up!!

109 Bob

3,762 posts

249 months

Thursday 18th March 2010
quotequote all
Have you done it yet? If not then, as others have said, they just pull out.

RichPu

25 posts

206 months

Thursday 18th March 2010
quotequote all
I had the same issue on my BMW. I spent 15 mins trying to work it out. In the end i found out it just pulls out. Did take a bit of force

HTH.
Regards
RichPu

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
I have pulled it out but still cant release the element from the centre piece, also looks like i may have been given the wrong element.

This is what i have now, what do you think?????

WhoreLex

3,030 posts

249 months

Thursday 18th March 2010
quotequote all
to remove the filter you just yank it off, then push the new one in till it clicks

replace the 'cock ring' rubber seal as well

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
Thanks, will have a go;)

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
OK, broken something now!!!!frown

These small pieces/clips have broken from the centre piece, prety sure they clip into the casing as it isnt clipping in now!!

Will it be safe to replace for a day and get another centre piece??

OnTheOverrun

3,965 posts

208 months

Thursday 18th March 2010
quotequote all
For next time, National Tyres VW Polo 1.2 oil and filter change £18.90 all in. smile

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
Thanks for that.

Parrot of Doom

23,075 posts

265 months

Thursday 18th March 2010
quotequote all
Hold back on driving the car, and get a new centre piece.

They normally need a stiff 'pull' and 'push' to pull off and put back on, but nothing should break.

Don't forget to do all the o-rings.

uk89camaro

1,399 posts

264 months

Thursday 18th March 2010
quotequote all
Thanks chaps. Took me 10 minutes to figure out where the bleedin' filter was! (penny dropped after opening the new filter box), but couldn't figure how to switch the filter over until now.



Edited by uk89camaro on Thursday 18th March 20:34

Evil.soup

Original Poster:

4,047 posts

236 months

Thursday 18th March 2010
quotequote all
Anyone have any idea where i can get one from and how much??

It was my fault as i pressed down on the centre of it when trying to workout how to take the old filter off. Must have broken the small prongs when i pushed it offfurious

Glad i spotted them before i just put it back on though, could have screwed the whole engine!!!!!

Thanks for the help too gents!

Disco_Biscuit

837 posts

225 months

Thursday 18th March 2010
quotequote all
Evil.soup said:
Anyone have any idea where i can get one from and how much??



Thanks for the help too gents!
TPS http://www.thetradepartsspecialists.co.uk/

Evil.soup

Original Poster:

4,047 posts

236 months

Monday 22nd March 2010
quotequote all
Thanks again to all!!!!!

Got the part from a friend that replaced the engine in her seat a few weeks ago in the end. Took until Friday afternoon before i remembered they have the same engine though and wasted a morning calling every breaker in Wales!!!!!

Back on the road and running well now though!