give me some prices please.
give me some prices please.
Author
Discussion

GingerWizard

Original Poster:

4,721 posts

229 months

Saturday 20th March 2010
quotequote all
I am going to get my alloys refurbed soon. I have the obligatory kerbing after letting the missis run about in the car (thats what i tell everyone but secretly i am drawn to kerbs like a moth to a flame!!!)

Now the wheel size is 205/45/R17 (i know thats a tyre size!!!) Its only the edges that need doing so not a full wheel refurb.

How much have other PHs paid for this sort of service and what were the wheel sizes? I have been looking at a few places but the price goes from 39-109 per wheel. Your expirence, please. Oh and anyone in the south kent area care to mention a place they have been pleased with?????


Thank you in advance,

GingerWizard

p.s oh the car is an 05 CTR if it matters.....

Edited by GingerWizard on Saturday 20th March 02:58

mybrainhurts

90,809 posts

286 months

Saturday 20th March 2010
quotequote all
KERBING...

mybrainhurts

90,809 posts

286 months

Saturday 20th March 2010
quotequote all
This is not going well....

Dr G

16,012 posts

273 months

Saturday 20th March 2010
quotequote all

10 Pence Short

32,880 posts

248 months

Saturday 20th March 2010
quotequote all
GingerWizard said:
I am going to get my alloys refurbed soon. I have the obligatory kerbing after letting the missis run about in the car (thats what i tell everyone but secretly i am drawn to kerbs like a moth to a flame!!!)

Now the wheel size is 205/45/R17 (i know thats a tyre size!!!) Its only the edges that need doing so not a full wheel refurb.

How much have other PHs paid for this sort of service and what were the wheel sizes? I have been looking at a few places but the price goes from 39-109 per wheel. Your expirence, please. Oh and anyone in the south kent area care to mention a place they have been pleased with?????


Thank you in advance,

GingerWizard

p.s oh the car is an 05 CTR if it matters.....

Edited by GingerWizard on Saturday 20th March 02:58
It's worth checking the leading edges of the spokes, too. They are always prone to stone chipping which leads to the lacquer coming off in increasingly big chunks (I had all 4 wheels replaced under warranty following their first winter).

sday12

5,068 posts

242 months

Saturday 20th March 2010
quotequote all
Lepsoms in Gillingham, top job, c£80 per wheel. Best in the business.

Dimski

2,100 posts

230 months

Saturday 20th March 2010
quotequote all
Mine were done by my local tire place. They didn't do them personally, but sent them off. Cost £55 per wheel (plus one wheel needed a slight repair, £10)

Fine job. They were badly scared beforehand. They are the Diamond cut ones on the Mondeo ST, and are ridiculously easily marked!

worldsslowestman

7 posts

200 months

Saturday 20th March 2010
quotequote all
i've been quoted £80 a wheel for 18inch diamond cut alloys

V6Alfisti

3,314 posts

258 months

Saturday 20th March 2010
quotequote all
I've paid as low as £25 per alloy (17") and the finish was average/good. I have seen results from the outfit that ProTyre use to refurb alloys at £50 a pop and they were very good. (3+ years ago)

edo

16,699 posts

296 months

Saturday 20th March 2010
quotequote all
sday12 said:
Lepsoms in Gillingham, top job, c£80 per wheel. Best in the business.
+1

GingerWizard

Original Poster:

4,721 posts

229 months

Saturday 20th March 2010
quotequote all
edo said:
sday12 said:
Lepsoms in Gillingham, top job, c£80 per wheel. Best in the business.
+1
cheers guys, i'll give them a call.

Gwiz