Cold air feed
Author
Discussion

mattjones0109

Original Poster:

14 posts

202 months

Saturday 20th March 2010
quotequote all
Can anyone recommend any cheapish air filters, not really for performance just for a bit more oomph. Also how to fix the additional cold air feed from the cold air flow to the filter itself?

Any feedback would be good

Thanks

theironduke

6,995 posts

219 months

Saturday 20th March 2010
quotequote all
I think if you let us know the car it may be easier to offer any advice smile and welcome!

mattjones0109

Original Poster:

14 posts

202 months

Sunday 21st March 2010
quotequote all
It's a Mk3 Clio

parapaul

2,828 posts

229 months

Sunday 21st March 2010
quotequote all
Cheapish air filter? This will make as much difference as anything else, and costs £3.99 yes






Blue Meanie

73,668 posts

286 months

Sunday 21st March 2010
quotequote all
I'm not sure you'll get much in the way of oomph with a cold air feed. I fitted a Fujita induction kit to my G35 and performcance increase was neither here nor there. No discernible increase in my opinion, HOWEVER, it does sound a HELL of a lot nicer at full bore!



smile

rhinochopig

17,932 posts

229 months

Sunday 21st March 2010
quotequote all
If you car has AC run a pipe from one of the air vents back into the air intake. The result supercooled intake air, giving massive gains in horse power.

Edited by rhinochopig on Sunday 21st March 16:20

Blue Meanie

73,668 posts

286 months

Sunday 21st March 2010
quotequote all
rhinochopig said:
If you car has AC run a pipe from one of the air vents back into the air intake. The result supercooled intake air, giving massive gains in horse power.

Edited by rhinochopig on Sunday 21st March 16:20
hehe Genius!

mattjones0109

Original Poster:

14 posts

202 months

Monday 22nd March 2010
quotequote all
Thanks everyone

300bhp/ton

41,030 posts

221 months

Monday 22nd March 2010
quotequote all
mattjones0109 said:
Can anyone recommend any cheapish air filters, not really for performance just for a bit more oomph. Also how to fix the additional cold air feed from the cold air flow to the filter itself?

Any feedback would be good

Thanks
Hi there.

Sadly cheap is not usually good. Your best bet is to look on the web for a kit designed for your car, such as K&N, ITG or Pipercross.

If no one makes one, then you’ll have to buy a universal kit or fab one up yourself.

But to do something worthwhile (stainless or silicon tubing) probably won’t be cheap either.

Biggest thing is, don’t buy a rubbish filter. Cheap cotton weave and those pointless metal mesh ones are no good at all. Remember a “filters” primary purpose is to filter.

As for extra HP. Well on its own I wouldn’t expect any big gains, but I do disagree that there is nothing to be gained. But it needs to be more than simply replacing the filter. Remember it’s an entire system.

Stock induction setups normally concentrate on noise suppression and refinement. So you need to look at removing any sound baffles and silencers that may be present in the stock setup. Combine this with a freer flowing filter and a cool air duct and it should see an improvement. Combine this with some sensible exhaust modifications and it should dramatically change how the engine drives.

Only thing to watch for is, if you get more cooler air to the engine, the ECU may not know what to do with it. This will cause it to mis-fuel the car, possible creating deadspots, stutters and less power. A re-tune would fix it, but it’s a lot of faffing and money for little returns.