FRP Engine Conversion Question.
Discussion
Hey, my mate has just aquired a bargain FRP that has suffered engine failure. He has been after one for a while but this came up so cheap and otherwise very good condition so he has snapped it up. Originally he wanted to find another FRP engine to put in it, however he has found these are very expensive to come by dueto rarity, and he is also looking at this as an opportunity to try for more power. So, what engines do you think would work? I'm sure I heard of Mk1 Focus RS engine being put in one, what engine would you think would bests suit it for best power, bearing in kind it's still a light FWD hatch/coupe. Any ideas?
Without wishing to piss on his bonfire, wouldn't it be cheaper & easier to repair the broken engine?
Custom manifold, exhaust, intercooler pipework etc, etc... You're talking a couple of grand at least on the cheap, and easliy double it for a nice, tidy looking install.
Factor in insurance and other DVLA hoops you may have to jump through, it may not be a good idea.
Not to mention, you're messing with what's'already a rare car. Wouldn't it be best to keep something like that standard?
Pumaspeed would probably be the best people to talke to about it anyway.
What happened, cambelt failure?
Custom manifold, exhaust, intercooler pipework etc, etc... You're talking a couple of grand at least on the cheap, and easliy double it for a nice, tidy looking install.
Factor in insurance and other DVLA hoops you may have to jump through, it may not be a good idea.
Not to mention, you're messing with what's'already a rare car. Wouldn't it be best to keep something like that standard?
Pumaspeed would probably be the best people to talke to about it anyway.
What happened, cambelt failure?
Edited by Vidal Baboon on Sunday 21st March 14:53
Yes I believe it is a cam belt failure causing damage to all the valves, the engine was reasonably high milage anyway, so he doesn't want to look at rebuilding it really. He knows it's a rare car, but the price of a low milage FRP engine is rediculous, probably be as cheap to get a more poweful engine in and make it a bit of a rocket.
How deep are your mates pockets or how handy is he with a set of spanners?
Cossie YB's, Zetec Turbo, CVH, ZVH (CVH with Zetec head) all sorts will fit and have been done before.
I have seen a Mk5 Fiesta ZS with a Focus RS engine (Mk1) and im sure they share the floorpan so that woudl robably fit to.
For something more unusaul why not try a Vauxhall 2 litre Redtop? They seem popular with the Mk 1 and 2 Escort boys......
As the old saying goes, If Ford didnt build it, A bloke in his shed will
Good luck
Cossie YB's, Zetec Turbo, CVH, ZVH (CVH with Zetec head) all sorts will fit and have been done before.
I have seen a Mk5 Fiesta ZS with a Focus RS engine (Mk1) and im sure they share the floorpan so that woudl robably fit to.
For something more unusaul why not try a Vauxhall 2 litre Redtop? They seem popular with the Mk 1 and 2 Escort boys......
As the old saying goes, If Ford didnt build it, A bloke in his shed will
Good luck
Failing that, i remember a few years ago at Ford Fair there was a Mk4 Escort Cab in bright yellow with a dodgy electric spolier on the back but a 3 litre V6 and gearbox from a Mondy ST. Im sure it'll fit into the Puma.
http://www.youtube.com/watch?v=1nSss7qBkDI
Edit to add link
http://www.youtube.com/watch?v=1nSss7qBkDI
Edit to add link
Edited by nicky.mattsson on Sunday 21st March 15:31
Somnophore said:
Yes I believe it is a cam belt failure causing damage to all the valves, the engine was reasonably high milage anyway, so he doesn't want to look at rebuilding it really. He knows it's a rare car, but the price of a low milage FRP engine is rediculous, probably be as cheap to get a more poweful engine in and make it a bit of a rocket.
Mrs.NCoT's Puma did a cambelt recently (thanks to a dodgy belt change by a fast fit place) - fortunately only 3 valves damaged. Complete top end rebuild including various ancillaries (water pump) etc. was the best part of 2k at a Ford specialist (Tremona in Southampton).If he is budgeting that sort of money, why not have the engine rebuilt? I am sure if the rest of the car is good and he spends £5k on a rebuild he could effectively have a new car.
http://www.pumapeople.com/forum/index.php
Ask on here as well.
Personally do something with this.
http://www.shawspeed.com/
I've dealt with John from Shawspeed personally and is a top bloke, jusst ring him up and ask him on his opinion, I'm sure he would have some input.
He is a registered trader on ZSOC.com as well, so try and find him on there aswell. Also there plenty of project cars on there for ideas. Search for Youngdan, his car is/was pretty sweet.
Not been on in a while though!
Ask on here as well.
Personally do something with this.
http://www.shawspeed.com/
I've dealt with John from Shawspeed personally and is a top bloke, jusst ring him up and ask him on his opinion, I'm sure he would have some input.
He is a registered trader on ZSOC.com as well, so try and find him on there aswell. Also there plenty of project cars on there for ideas. Search for Youngdan, his car is/was pretty sweet.
Not been on in a while though!
Edited by Ross1988 on Sunday 21st March 16:01
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff


