Closing gap under garage door?
Closing gap under garage door?
Author
Discussion

FreeLitres

Original Poster:

6,128 posts

207 months

Sunday 13th June 2010
quotequote all
Hi all,

I have a gap of approximately 25mm under my garage door which is annoying as leaves and dust constantly blow into the garage. I am looking at sensible ways to close this gap.

Through some internet searches I have found "Weatherstop" which is basically a rubber strip which you glue to the garage floor - this looks like a good solution for me, but the size of gap you can plug with their product is 15mm or 20mm.

Are there any other (fairly tidy) solutions I could consider?

ETA: Apologies for the dull post, but I need this sorting asap as I have a car arriving next weekend!

Edited by FreeLitres on Sunday 13th June 19:35

neilski

2,563 posts

265 months

Sunday 13th June 2010
quotequote all
Get rid of your garage door and buy one that fits,

FreeLitres

Original Poster:

6,128 posts

207 months

Sunday 13th June 2010
quotequote all
neilski said:
Get rid of your garage door and buy one that fits,
This would be ideal, but I am looking for a cheaper solution for now. Any ideas?

focusboy

274 posts

220 months

Sunday 13th June 2010
quotequote all
A strip of wood that can be driven over, i used a bit of 2*1 before that i screwed to the floor, lip of garage door rests against it and also helps with strength for the bottom lock.

Hth Garry

Mroad

829 posts

245 months

Sunday 13th June 2010
quotequote all
Fix a strip of wood to the bottom of the door. Cheap and simple.

davepoth

29,395 posts

229 months

Sunday 13th June 2010
quotequote all
Attach a thick rubber sheet to the bottom of the door I think.

*Al*

3,830 posts

252 months

Sunday 13th June 2010
quotequote all
Yes fit the rubber strip to the door base and also fit a thin strip of wood across the door opening on the floor.This also stops torrential rain entering.

Wacky Racer

41,363 posts

277 months

Sunday 13th June 2010
quotequote all
focusboy said:
A strip of wood that can be driven over, i used a bit of 2*1 before that i screwed to the floor, lip of garage door rests against it and also helps with strength for the bottom lock.

Hth Garry
This.

Cheap and simple.

Puddenchucker

5,934 posts

248 months

Sunday 13th June 2010
quotequote all

Balmoral Green

42,561 posts

278 months

Sunday 13th June 2010
quotequote all
I got a rectangular sheet of wire mesh from a DIY store and cut it into three strips and screwed them to the bottom of the inside of the door. That way the dirt and leaves are kept out, but there is lots of ventilation.

dylan0451

1,040 posts

221 months

Sunday 13th June 2010
quotequote all
Balmoral Green said:
I got a rectangular sheet of wire mesh from a DIY store and cut it into three strips and screwed them to the bottom of the inside of the door. That way the dirt and leaves are kept out, but there is lots of ventilation.
do you cook up a lot of smack in there? tongue out

bazking69

8,620 posts

220 months

Sunday 13th June 2010
quotequote all
A length of heavy duty draught excluder glued to the lip of the bottom of the door should do the job.

Oily Nails

2,932 posts

230 months

Sunday 13th June 2010
quotequote all
Go befriend the Local Loner Fat Kid and bribe him with cake to lie against the door gap when it rains.



(this is an expensive option though, as Fat Kids get through a lot of cake)

dilbert

7,741 posts

261 months

Sunday 13th June 2010
quotequote all
Wouldn't it be better to adjust the door properly and put a weather strip at the top?

odyssey2200

18,650 posts

239 months

Sunday 13th June 2010
quotequote all
I managed to find some proper draught excluders that I have fitted to the bottom of the garage door.

They are the full length of the door and I have rivited then to the door.

No more leaves in the garage thumbup