What do dealerships do to alloys?
Discussion
When my car goes in for a service or warranty work (fairly regular as it's a BMW) the dealership always gives it a clean. Even though I usually get it back with water marks etc the alloys always look fantastic.
Closer inspection shows a white powder residue on the tyres (I doubt they are doing lines off them
), what do they use to clean the alloys? I've used a ton of different products but only get the same result with a lot of hard work, I'm sure the dealers don't have a guy spending 2 hours with a toothbrush cleaning my wheels! Could I be making my life easier?
A colleague of mine came in today and has just got her car back form a service and asked me exactly the same question about the powder!
Closer inspection shows a white powder residue on the tyres (I doubt they are doing lines off them
), what do they use to clean the alloys? I've used a ton of different products but only get the same result with a lot of hard work, I'm sure the dealers don't have a guy spending 2 hours with a toothbrush cleaning my wheels! Could I be making my life easier?A colleague of mine came in today and has just got her car back form a service and asked me exactly the same question about the powder!
http://www.reagent.co.uk/brick-acid.html?gclid=CN3...
DO NOT DO THIS!!!!!
Bilberry is what you need
http://www.detailingworld.co.uk/forum/showthread.p...
Edited to be abit more usefull
DO NOT DO THIS!!!!!
Bilberry is what you need
http://www.detailingworld.co.uk/forum/showthread.p...
Edited to be abit more usefull
Edited by Valetco on Wednesday 18th August 10:51
Easiest way to keep alloys looking new is to seal them with a few layers of Rimwax, Poorboys or Chemical Guys wheel sealant after they have been thoroughly cleaned/clayed etc. Then all you'll need is a wash with regular shampoo and sponge/mitt to get the brake dust off every few weeks. Regular use of corrosive, acidic wheel cleaner will not only corrode your wheels in a matter of months, it'll also corrode your brake calipers, carriers, hoses etc.
Best avoid the "scratch & shine" dealer washes altogether to be honest...
Best avoid the "scratch & shine" dealer washes altogether to be honest...
Valetco said:
Bilberry is what you need
http://www.detailingworld.co.uk/forum/showthread.p...
I use Bilberry, it's very good.http://www.detailingworld.co.uk/forum/showthread.p...
u13rr1 said:
Best avoid the "scratch & shine" dealer washes altogether to be honest...
Definitely! I never let them touch my paintwork. The one time they did it "as a favour" after I specifically told them not to wash it, they put a nice set of swirls all over the car. Needless to say they rectified it (or should I say, had it rectified by someone that knew what they were doing).I can recommend this (as do Practical Classics):
http://www.turtlewaxuk.com/prod.asp?Partcode=FG542...
I spray it on before I soap the car then clean it off, after rinsing, using one of those non-scratch scouring sponges.
http://www.spontex.co.uk/products.aspx?pID=170
Really effective imo
http://www.turtlewaxuk.com/prod.asp?Partcode=FG542...
I spray it on before I soap the car then clean it off, after rinsing, using one of those non-scratch scouring sponges.
http://www.spontex.co.uk/products.aspx?pID=170
Really effective imo
We used to use this at a dealership.
TFR : http://www.eurochem.co.uk/products.php?categories_...
Pretty lethal if it wasn't diluted and I can't imagine your wheels would last long if used often.
This coupled with a pressure washer at 90 degrees c, and a scrubbing brush if needed is enough to move any dirt from anything.
TFR : http://www.eurochem.co.uk/products.php?categories_...
Pretty lethal if it wasn't diluted and I can't imagine your wheels would last long if used often.
This coupled with a pressure washer at 90 degrees c, and a scrubbing brush if needed is enough to move any dirt from anything.
steveo3002 said:
strong wheel acid and a steam cleaner usualy
No wonder they look so good, it must strip a thin layer of paint each time!I use Turtlewax Nano cleaner from Halfords which is good, it's pretty acidic so only use it rarely and then give the wheels a good wax seal which takes forever with 20 spoke wheels!!
With a good wax on there I find I can just get away with shampooing the wheels for a month until the next proper cleaning session!!
Will try some of the products mentioned here though, thanks!
steveo3002 said:
DangerousMike said:
brick acid??
driveway cleaneri would use a 50/50 mix of conc sulphuric acid and hydrogen peroxide http://curlyarrow.blogspot.com/2008/01/how-to-clea...
http://web.princeton.edu/sites/ehs/labsafetymanual...
Edited by DangerousMike on Wednesday 18th August 12:09
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff


