What Car?....is worth a large amount more in bits than whole
Discussion
So I have two MX5's, building one heavily modified track car from the two of them and I was then going to sell one the other. However basically I don't have time to build two so decided that I would break the one I didn't intend to keep. I'd have happily sold it for £700, so far on ebay I have liberated £100 for the wing mirrors, £20 for the grill, £20 for the clocks, £30 for centre console, £20 for the pop-up covers, £5 for the rear brake light. I have barely touched the surface breaking the car and already got £195 back. Safe to say the car is worth more in bits and bonus is dismantling is far quicker and easier than reassembly 
So what car is King when it comes to being Pennys to buy in one bit but Pounds in pieces?
I guess it has to be something with an active owners club?

So what car is King when it comes to being Pennys to buy in one bit but Pounds in pieces?
I guess it has to be something with an active owners club?
Hugo a Gogo said:
A mate of mine is rebuilding a Unimog and it's astounding the second hand price of various obscure brackets and stuff, he's bought several 'half' unimogs, to scavenge and sell on bits
What kind of Mog?This is a good call, parts are hugely expensive over here, especially for the older round-cab models.
Honda accord type r's are worth more in parts nowadays engines fetch for £1500+ alone and other things like lights and interiors go for a few quid too.
On a side note I used to spen a lot of time at the local Honda parts counter and got talking to the guy who works there and he mentioned that a civic type-r (ep3) in parts would cost nearly £35k if you where to build one from scratch
On a side note I used to spen a lot of time at the local Honda parts counter and got talking to the guy who works there and he mentioned that a civic type-r (ep3) in parts would cost nearly £35k if you where to build one from scratch
I am thinking of breaking my E28 525E as it's worth a lot more in bits. Good wings are hard to find, the 2.7L bottom end, chrome, valances, interior....all a bit scarce. I reckon I should get a fair amount broken, but struggle to get £500 as is (cracked head). I hate to do it though....not many rust free e28's about any more.
Gaz. said:
I bet Ryan's old white MR2T must be worth an absolute fortune in bits. Last time I saw it in the classifieds the seller couldn't even shift it for just over £4k.
Wow, didn't he sell it to a chap in Ireland for £10K? I saw the car about a year after when Ryan had it back to fix some issues it had developed and it looked a right mess, but I'd assumed it'd all been sorted out long ago.MR2's in general must be a good choice though especially if you got a heavily modified one to strip.
Lefty said:
Hugo a Gogo said:
A mate of mine is rebuilding a Unimog and it's astounding the second hand price of various obscure brackets and stuff, he's bought several 'half' unimogs, to scavenge and sell on bits
What kind of Mog?This is a good call, parts are hugely expensive over here, especially for the older round-cab models.
lance1a said:
zeppelin101 said:
lance1a said:
I hate to do it though....not many rust free e28's about any more.
If it is truly rust free someone will mash your arm off for the shell.
lance1a said:
zeppelin101 said:
lance1a said:
I hate to do it though....not many rust free e28's about any more.
If it is truly rust free someone will mash your arm off for the shell.Get yourself over there.
You would have thought so hey? but as usual....everyone wants it for nothing.

Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff




about £2.5k in bits and because it's got a problem and doesn't run as well as it should about £800 as a whole! It's so sad to see it on the drive and not being able to drive it. Haven't got the heart to strip and sell it either