How to remove inside door panel Peugot 308

[skilly1]

First I would like to say that my G/F bought this car without my consent, it has the worst brakes of any car I have driven and the clutch action is terrible, however I digress.

She has managed to wind down the passenger rear window while a blind was attached and get some of the blind stuck between the window and the inside door panel. The window is now jammed.

Does anyone know or have a diagram of how to remove the inside passenger plastic door panel? I have a torx set etc.

[Mr Gear]

Step 1: Remove wife
Step 2: Hit car with hammer
Step 3: Cry a little bit

[trickywoo]

Fire is your best option.

[ExPat2B]

Hi I have similar situation, my friend has a Poogeout 307 and the bloody things a nightmare, its only 4 years old but already the Airbag and Turbo have failed.

To remove the door panel, take the screws out of the outside edge, then remove the vertical screw from inside the top door "pocket" ( its not the handle, and its not the bottom pocket )

Then pop the plastic clips off the inside bottom edge and close to the hinges, ( be careful not to snap them ) and lift the panel vertically, it has a flange that seats it into the glass, and pull it towards you to get the final plastic clips out.

Hope this helps.

[ANS2vrs370]

The Crack Fox said:

Has she played this game ? > http://www.chelfing.com/userimages/thatpeugeotgame...

being printed and distributed to various collegues at the moment

[skilly1]

ExPat2B said:

Hi I have similar situation, my friend has a Poogeout 307 and the bloody things a nightmare, its only 4 years old but already the Airbag and Turbo have failed.

To remove the door panel, take the screws out of the outside edge, then remove the vertical screw from inside the top door "pocket" ( its not the handle, and its not the bottom pocket )

Then pop the plastic clips off the inside bottom edge and close to the hinges, ( be careful not to snap them ) and lift the panel vertically, it has a flange that seats it into the glass, and pull it towards you to get the final plastic clips out.

Hope this helps.

Thanks, will give it a try.