F117s break cover
Author
Discussion

Dr Jekyll

Original Poster:

23,820 posts

280 months

Thursday 22nd October 2020
quotequote all
Apparently a couple have tuned up at Miramar.

https://theaviationist.com/2020/10/21/two-f-117-ni...

sherman

14,665 posts

234 months

Thursday 22nd October 2020
quotequote all
Has top gun 2 finished filming? hehe

FourWheelDrift

91,366 posts

303 months

Thursday 22nd October 2020
quotequote all

LotusOmega375D

8,964 posts

172 months

Friday 23rd October 2020
quotequote all
I remember one turned up unannounced at the Southend Airshow ca. 2000. It did one fly past and was never seen again. Very stealthy.

LotusOmega375D

8,964 posts

172 months

Saturday 24th October 2020
quotequote all
Brief video of them taking off.

https://youtu.be/1D4ehguQgA0

LukeBrown66

4,479 posts

65 months

Saturday 24th October 2020
quotequote all
I always wondered with that thing how the thrust ever actually managed to get it off the ground, those nozzles are so flat, thin and seemingly ineffectual, yet that is what the plane relies on to take off.

it's so alien compared to modern planes or any other jet in reality it just never looks right to me, a long flat basically board of outlets, just seems like it would be very restricted!

Tony1963

5,792 posts

181 months

Saturday 24th October 2020
quotequote all
It's just good ol action and reaction. The aircraft is fairly light, and isn't a supersonic, fuel hungry beast, so its thrust requirements are low.
Ok, it is weird looking, but form following function etc.

IanH755

2,450 posts

139 months

Saturday 24th October 2020
quotequote all
LukeBrown66 said:
I always wondered with that thing how the thrust ever actually managed to get it off the ground, those nozzles are so flat, thin and seemingly ineffectual, yet that is what the plane relies on to take off.

it's so alien compared to modern planes or any other jet in reality it just never looks right to me, a long flat basically board of outlets, just seems like it would be very restricted!
The wide thin bits you see aren't the engines "nozzles" as such, those are deeper within the bodywork, those wide thin parts are more of a diffuser used for mixing the exhaust with the air, dropping the pressure and heat/noise.