Ai've got an 'ole
Author
Discussion

dibbers006

Original Poster:

14,640 posts

249 months

Tuesday 28th June 2011
quotequote all
The initial message was deleted from this topic on 18 December 2023 at 12:23

philmh

363 posts

202 months

Tuesday 28th June 2011
quotequote all
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.

scdan4

1,299 posts

191 months

Tuesday 28th June 2011
quotequote all
surely a job for gaffa tape. you could even attempt to colour match it if you're feeling posh.

ajsphead

170 posts

186 months

Wednesday 29th June 2011
quotequote all
You could round it off and fit a rubber capped grommet, or make it the right size to fit an aerial of some sort.Mind you, I'm assuming the hole is on the outside.
If the car is nice and you want a better repair, headlining out, weld a plate to the back then fill and spray.

mgmrw2003

20,951 posts

188 months

Wednesday 29th June 2011
quotequote all
Super Steel.

Imagine black araldite. Cut some coke can, and use that stuff.

My mk3 fiesta loved it

NHK244V

3,358 posts

203 months

Wednesday 29th June 2011
quotequote all
P40 followed bt P38
can't beleive i'm actually recomending the correct course of action here but the hamsters head has already been done frown

mgmrw2003

20,951 posts

188 months

Wednesday 29th June 2011
quotequote all
Afraid to ask, but how do we know the size of the hamster that could put it's head through the aforementioned hole? Have we tried?

VB

9,074 posts

246 months

Wednesday 29th June 2011
quotequote all
philmh said:
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.
hehe

soad

34,754 posts

207 months

Wednesday 29th June 2011
quotequote all
philmh said:
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.
That's quite funny actually biggrin


anonymous-user

85 months

Wednesday 29th June 2011
quotequote all
soad said:
philmh said:
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.
That's quite funny actually biggrin
But completely impractical...the hamster will die, start to decompose, and once the skin rots away it'll be too small for the hole and fall out.

andy43

13,319 posts

285 months

Wednesday 29th June 2011
quotequote all
yellowbentines said:
soad said:
philmh said:
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.
That's quite funny actually biggrin
But completely impractical...the hamster will die, start to decompose, and once the skin rots away it'll be too small for the hole and fall out.
Old boat building tip - as long as you dip the hamster in fibreglass resin before insertion, it'll be fine.



Possibly

mgmrw2003

20,951 posts

188 months

Wednesday 29th June 2011
quotequote all
andy43 said:
yellowbentines said:
soad said:
philmh said:
Squeeze a large hamsters head in it. Wont fall out as easy as a small one.
That's quite funny actually biggrin
But completely impractical...the hamster will die, start to decompose, and once the skin rots away it'll be too small for the hole and fall out.
Old boat building tip - as long as you dip the hamster in fibreglass resin before insertion, it'll be fine.



Possibly
Why not feed the hamster with food and water, keep it alive and trapped?

If arse down, may need to apply a nappy to it

J4CKO

47,092 posts

231 months

Wednesday 29th June 2011
quotequote all
Get a Hamster and he/she can have their own sun roof.

Failing that, cut it square, weld in a piece cut to size, tack it first, then weld it slowly in stages to not build too much heat and distroy the roof, gring the weld back, fill and paint, easy smile

B'stard Child

31,180 posts

277 months

Wednesday 29th June 2011
quotequote all
Grind back to good metal - get jiggy with the miggy

Sorry for the response but the hamster option was already taken and the p38/p40 option also taken too

Mr Snap

2,364 posts

188 months

Wednesday 29th June 2011
quotequote all
Don't forget to install a little wheel, so the hamster can get some exercise...