What colour to hide a bad shape
What colour to hide a bad shape
Author
Discussion

Greg_D

Original Poster:

6,542 posts

277 months

Thursday 28th March 2013
quotequote all
a single seater track car of mine has undergone some fairly serious bodywork surgery to enclose a new engine package. The net result of this is some fairly 'challenging' lines at the rear.

it is going in for paint next week and i am still undecided on what colour scheme would best hide what can only be described as a hunchback.

her 'good side'


the not so good side


over to you guys

wombat172a

1,458 posts

214 months

Thursday 28th March 2013
quotequote all
Is "try again" not an option then?

big_boz

1,685 posts

238 months

Thursday 28th March 2013
quotequote all
Lots of Stickers that will break up the shape is the best you can hope for

Liquid Tuna

1,403 posts

187 months

Thursday 28th March 2013
quotequote all
Bright purple.

Greg_D

Original Poster:

6,542 posts

277 months

Thursday 28th March 2013
quotequote all
wombat172a said:
Is "try again" not an option then?
i'm afraid not, the shape is defined by the 'hard points' of the mechanical package, there is only a few mill clearance at the critical places to try and minimise the shape.

i really just need to cover it up as well as i can, i was thinking the colour of tarmac, essentially, a dark grey, almost like the titanium grey i had on a previous car of mine (alfa GTV)

GroundEffect

13,864 posts

187 months

Thursday 28th March 2013
quotequote all
Why do you need to cover it up at all?


drivin_me_nuts

17,949 posts

242 months

Thursday 28th March 2013
quotequote all
Do it two colours. Black and silver - use the black underneath and draw the line of the black up at the back and then a dark silver on top. A strong colour line will hide the ugly rear end - especially if you red stripe it between the two. That wy the eye follows the colours, not the shape.

fjord

2,143 posts

168 months

Thursday 28th March 2013
quotequote all

big_boz

1,685 posts

238 months

Thursday 28th March 2013
quotequote all
fjord said:
All i can see is a car transporter, how does this help OP?

Uncle John

5,414 posts

222 months

Thursday 28th March 2013
quotequote all
Black and white stripes.

fjord

2,143 posts

168 months

Thursday 28th March 2013
quotequote all
big_boz said:
All i can see is a car transporter, how does this help OP?
He takes it everywhere on the transporter. People won't pay attention and assume the ill-fitting panels are as a result of ongoing repairs, and it's being transported somewhere for this very reason.

big_boz

1,685 posts

238 months

Thursday 28th March 2013
quotequote all
fjord said:
He takes it everywhere on the transporter. People won't pay attention and assume the ill-fitting panels are as a result of ongoing repairs, and it's being transported somewhere for this very reason.
Takes what?

Robb F

4,614 posts

202 months

Thursday 28th March 2013
quotequote all
big_boz said:
fjord said:
He takes it everywhere on the transporter. People won't pay attention and assume the ill-fitting panels are as a result of ongoing repairs, and it's being transported somewhere for this very reason.
Takes what?
His car?

TheHeretic

73,668 posts

286 months

Thursday 28th March 2013
quotequote all
How about 2 colours, and a stripe or something? Should break it up.

big_boz

1,685 posts

238 months

Thursday 28th March 2013
quotequote all
Robb F said:
His car?
What Car?

tumbleweed

Greg_D

Original Poster:

6,542 posts

277 months

Thursday 28th March 2013
quotequote all
GroundEffect said:
Why do you need to cover it up at all?
there's quite a lot going on in there (now all the boost pipes and heat management gubbins are in there, space is even tighter)



it's a bit of a spagetti mess in there through necessity and needs covering over.

I knew the transverse layout was a mistake, lol. but the learning experience it has afforded me in rebuilding it has been unique, i have gained so much experience doing it that the end result is in many ways, immaterial...

Krikkit

27,943 posts

212 months

Thursday 28th March 2013
quotequote all
Surely a new rear clam is in order to cover that up and restore a bit of smoothness? Also, won't the rear wing need lifting a fair bit, that lump is really going to make a mess of the flow.

SuperchargedVR6

3,138 posts

251 months

Thursday 28th March 2013
quotequote all
Not pink

Twincam16

27,647 posts

289 months

Thursday 28th March 2013
quotequote all
Greg_D said:
there's quite a lot going on in there (now all the boost pipes and heat management gubbins are in there, space is even tighter)



it's a bit of a spagetti mess in there through necessity and needs covering over.

I knew the transverse layout was a mistake, lol. but the learning experience it has afforded me in rebuilding it has been unique, i have gained so much experience doing it that the end result is in many ways, immaterial...
I agree with GroundEffect here - even though it is transverse I don't think it's bad-looking. Also, surely leaving it exposed for the time being will help with the heat-management issues.

I reckon you leave it exposed, '70s F1-style, until you scrape together the funds to make a proper glassfibre cowl for it, possibly with an airbox. In the meantime, it looks fine with nothing on it.

Greg_D

Original Poster:

6,542 posts

277 months

Thursday 28th March 2013
quotequote all
biggrinbiggrinbiggrin

i don't know, you can't see the gunt when it is covered by the tent.

maybe if i spray it dusky pink, people will be so dumbfounded that they won't make unkind comments about the hump!!!!!! scratchchin