Touch up paint....
Discussion
Bought some for a couple of marks and now, thanks to my lack of skill, shows a couple of blobs (or as my mum said spots) on the car body work.
The first is on the plastic door trim and the other is on the rear arch.
First is about 3-5mm dia and the 2nd is 8-10mm diameter.
So, what is the best way to resolve my f
k up?
Polish, t-cut, re-spray, detail, leave it, etc?
Thanks
The first is on the plastic door trim and the other is on the rear arch.
First is about 3-5mm dia and the 2nd is 8-10mm diameter.
So, what is the best way to resolve my f
k up?Polish, t-cut, re-spray, detail, leave it, etc?
Thanks
gaz1234 said:
Bought some for a couple of marks and now, thanks to my lack of skill, shows a couple of blobs (or as my mum said spots) on the car body work.
The first is on the plastic door trim and the other is on the rear arch.
First is about 3-5mm dia and the 2nd is 8-10mm diameter.
So, what is the best way to resolve my f
k up?
Polish, t-cut, re-spray, detail, leave it, etc?
Thanks
Some very fine wet and dry to take the high spot offThe first is on the plastic door trim and the other is on the rear arch.
First is about 3-5mm dia and the 2nd is 8-10mm diameter.
So, what is the best way to resolve my f
k up?Polish, t-cut, re-spray, detail, leave it, etc?
Thanks
Then next time instead of using the bloody great brush that is attached to the lid of the touch up stick - get a cocktail stick and nibble at the end for a min to make a small paint brush effect and then dip that into the bruch to trasfer some paint and dab that into the stone chip
This would do the trick - http://www.i4detailing.co.uk/acatalog/Festool_De_N...
However it is a tad pricey, quickest/cheapest fix is to attempt to use some rubbing compound or fine wet and dry paper as suggested. You could always sign up on detailing world and see if there is a local member who is willing to help you out in return for beer tokens.
However it is a tad pricey, quickest/cheapest fix is to attempt to use some rubbing compound or fine wet and dry paper as suggested. You could always sign up on detailing world and see if there is a local member who is willing to help you out in return for beer tokens.
what/how the hell does this work http://www.i4detailing.co.uk/acatalog/Festool_De_N...
gaz1234 said:
what/how the hell does this work http://www.i4detailing.co.uk/acatalog/Festool_De_N...
http://www.detailingworld.co.uk/forum/showthread.p... long guide there. Like I said, sign up on dw and see if a local weekend warrior can help. Edited by giblet on Wednesday 10th April 20:43
Edited by giblet on Wednesday 10th April 20:43
gaz1234 said:
yes been signed up for 5 years and posted my 2nd ever post! lol
not sure if i have the skills so will see if there is anyone local
There are usually a few local folk who are kind enough to help out for beer tokens or a donation to a charity. You could also see if there is a meet local to you, the forecasted good weather means more and more detailing folk should be having meetupsnot sure if i have the skills so will see if there is anyone local
giblet said:
There are usually a few local folk who are kind enough to help out for beer tokens or a donation to a charity. You could also see if there is a meet local to you, the forecasted good weather means more and more detailing folk should be having meetups
ok, will keep an eye out..This is the safest stuff, it will flatten the new blob of paint without any possibility of doing damage.
Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o
Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o
TX1 said:
This is the safest stuff, it will flatten the new blob of paint without any possibility of doing damage.
Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o
I've used Electrolube's UltraSolve for this. Bought a couple of cans off eBay.Used it may times over the years, bit pricey but it will get you out of bother.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
http://www.youtube.com/watch?v=G0AkIQCka1o
Works OK using a rag on something like a flat piece of plastic (such as a non-embossed credit card) to flatten the blob to the same level as the existing paint. Tricky thing is leaving the paint long enough - it stays soft for days.
Details here: http://www.detailingworld.co.uk/forum/showthread.p...
In the past I've used Langka 'Blob Eliminator' for smoothing off touch-up paint in stone chips.
With a little bit of practice it works pretty well.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
With a little bit of practice it works pretty well.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
Puddenchucker said:
In the past I've used Langka 'Blob Eliminator' for smoothing off touch-up paint in stone chips.
With a little bit of practice it works pretty well.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
which kit, there are two?With a little bit of practice it works pretty well.
http://www.frost.co.uk/langka-paint-chip-repair-ki...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


