1 series with "bulb gone" warning light and pistons replaced!
1 series with "bulb gone" warning light and pistons replaced!
Author
Discussion

BE57 TOY

Original Poster:

2,628 posts

178 months

Thursday 11th April 2013
quotequote all
Hi all

Very quick one - friend is buying a used 1 series that's had the pistons replaced. It's only done low miles (50k on a 57 plate) so this is slightly worrying as to how it may have been treated.

He's also just told me the "bulb out" warning light is on even though there are no bulbs gone.

Does anyone know if these are common issues with the 1 series? It's only a 116i ES but he's getting it for cheap!

MoelyCrio

2,502 posts

213 months

Thursday 11th April 2013
quotequote all
There aren't usually enough warning lights for the number of warnings usually, so sometimes they use combinations to indicate different things - check the manual.

Eighteeteewhy

7,259 posts

199 months

Thursday 11th April 2013
quotequote all
Just find another one without the problems.

soda

1,131 posts

192 months

Thursday 11th April 2013
quotequote all
Bulb warning light on means one bulb will blow shortly, it doesn't just register on and off. A change in resistance (or correct tech term) means one is on the way out.

TheEnd

15,370 posts

219 months

Thursday 11th April 2013
quotequote all
Petrol or diesel?
I haven't really heard of many BMW engines needing the pistons replaced, but new injectors are fairly common.
Would it be a non car person just using a term they saw written down somewhere?

The bulb warning lights can be from LED bulbs being fitted, or sometimes even slight corrosion on the bulb contacts.

marmitemania

1,571 posts

173 months

Thursday 11th April 2013
quotequote all
If you do a Google you will see these cars have issues with oil pressure, possibly why the pistons have been replaced. Looks like they have lots of problems, maybe he should look at a different engine, or even a different make of car.

mat777

10,714 posts

191 months

Thursday 11th April 2013
quotequote all
soda said:
Bulb warning light on means one bulb will blow shortly, it doesn't just register on and off. A change in resistance (or correct tech term) means one is on the way out.
What use is that unless it specifically tells you which bulb it is?

marmitemania

1,571 posts

173 months

Thursday 11th April 2013
quotequote all
mat777 said:
soda said:
Bulb warning light on means one bulb will blow shortly, it doesn't just register on and off. A change in resistance (or correct tech term) means one is on the way out.
What use is that unless it specifically tells you which bulb it is?
My old Range Rover tells you exactly which bulb is out and can also alert you to around 200 other faults or warnings. But its a Land Rover and its made in England so therefor it must be st, the same as if it had done 50K and needed new pistons it would be jumped on and condemed as just the car being crap because its not Germen built.

TheEnd

15,370 posts

219 months

Thursday 11th April 2013
quotequote all
The one series does know what bulb it is, every bulb warning sent to the dash is different depending on the bulb.

If you scroll through the check control until you get the bulb warning, press and hold the BC stalk button, and you'll get a CCID code which relates to the bulb.
Alternatively, you can check if a bulb isn't working by the self test procedure, activate the bulb in question, and look for a light from the bulb. If the light is present, it has passed the test. If there is no light, that is the bulb with a problem.

marmitemania

1,571 posts

173 months

Thursday 11th April 2013
quotequote all
TheEnd said:
The one series does know what bulb it is, every bulb warning sent to the dash is different depending on the bulb.

If you scroll through the check control until you get the bulb warning, press and hold the BC stalk button, and you'll get a CCID code which relates to the bulb.
Alternatively, you can check if a bulb isn't working by the self test procedure, activate the bulb in question, and look for a light from the bulb. If the light is present, it has passed the test. If there is no light, that is the bulb with a problem.
That's a st way of doing it. Why cant it just tell which bulb it is?

BE57 TOY

Original Poster:

2,628 posts

178 months

Thursday 11th April 2013
quotequote all
Thanks for all the responses which I shall pass on to him.

It started out as a bargain car which I encouraged him towards as he's a young lad and it suits his needs, but the more he tells me about the car, the more the alarm bells are ringing.

Unfortunately he is dead set on having a 1 series and can only afford to buy / insure a small petrol one.

It now turns out it also has condensation in one headlight from "a slight bump" and a filthy interior. Oh and chunks missing in the tyres and the service light on!

dowahdiddyman

965 posts

242 months

Thursday 11th April 2013
quotequote all
New headlight, new tyres, service required. If your mate doesn`t move on to the next one he wants putting in a rubber room.

joebongo

1,517 posts

206 months

Thursday 11th April 2013
quotequote all
BE57 TOY said:
Thanks for all the responses which I shall pass on to him.

It started out as a bargain car which I encouraged him towards as he's a young lad and it suits his needs, but the more he tells me about the car, the more the alarm bells are ringing.

Unfortunately he is dead set on having a 1 series and can only afford to buy / insure a small petrol one.

It now turns out it also has condensation in one headlight from "a slight bump" and a filthy interior. Oh and chunks missing in the tyres and the service light on!
All that seals the deal - avoid like the plague as the owner hasn't looked after it and these are just the things you know about it now - god knows what else lurks for the next owner.

manitou

160 posts

180 months

Thursday 11th April 2013
quotequote all
I had a 120i sport bought with 15k on the clock with FBMWSH it was plaged with numerous niggly little problems final straw for me was when the dsc & abs packed up was quoted £1800 to fix i got rid asap

Perd Hapley

1,750 posts

204 months

Thursday 11th April 2013
quotequote all
If your mate can only afford a 1 series by finding the ultimate cheapest version then is he going to be able to run the thing?

carreauchompeur

18,334 posts

235 months

Thursday 11th April 2013
quotequote all
Ropey crashed 1 series: You must really want a BMW

hehe

Avoid, avoid, avoid.
Quite surprised about the bulb warning system's lack of finesse. Even my '99 M3 knows which one is kaput.

BE57 TOY

Original Poster:

2,628 posts

178 months

Thursday 11th April 2013
quotequote all
carreauchompeur said:
Ropey crashed 1 series: You must really want a BMW

hehe

Avoid, avoid, avoid.
Quite surprised about the bulb warning system's lack of finesse. Even my '99 M3 knows which one is kaput.
Me too - from looking online it looks like the dash doesn't have a digital read out of errors etc, but that lights just come on?

Looks all very old fashioned.

All my Audis have had digital driver info systems that tell you everything.

Krikkit

27,941 posts

212 months

Thursday 11th April 2013
quotequote all
It wouldn't surprise me if the higher-specced cars have a proper system as you would expect which was chopped out for the pov-spec tiny-engined version.

Fastdruid

9,413 posts

183 months

Thursday 11th April 2013
quotequote all
TheEnd said:
The one series does know what bulb it is, every bulb warning sent to the dash is different depending on the bulb.

If you scroll through the check control until you get the bulb warning, press and hold the BC stalk button, and you'll get a CCID code which relates to the bulb.
What a right royal pain in the backside.
On my apparently lesser brand car it tells me about such things with messages like "Stop Lamp Warning Fault" which does rather narrow it down without having to do a special button dance and then look up a secret code.

My previous lesser brand vehicle managed to have an display about 50mm * 25mm that told you about every bulb, (it also managed 174k without needing new pistons before I sold it as a runner wink ).

McWigglebum4th

32,414 posts

235 months

Thursday 11th April 2013
quotequote all
marmitemania said:
TheEnd said:
The one series does know what bulb it is, every bulb warning sent to the dash is different depending on the bulb.

If you scroll through the check control until you get the bulb warning, press and hold the BC stalk button, and you'll get a CCID code which relates to the bulb.
Alternatively, you can check if a bulb isn't working by the self test procedure, activate the bulb in question, and look for a light from the bulb. If the light is present, it has passed the test. If there is no light, that is the bulb with a problem.
That's a st way of doing it. Why cant it just tell which bulb it is?
Isn't it a bit easier to switch the lights on and get out of the car and look

Or is that just a bit too radical