Buying ribbon cable?
Author
Discussion

eltax91

Original Poster:

10,795 posts

237 months

Sunday 14th April 2013
quotequote all
Hi all. Following the escapades in the following thread here, I took Nigel up on his kind offer of looking at my iDrive unit. (Cheers again mate, very kind of you to help).

Anyway, the damage caused is merely some damage to a ribbon cable, like this:


So, I'm trying to track one down, but I'm struggling. Google/ eBay show nothing. The cable reads the following: SUMITOMO-H AWM 20861 105C 60V VW-1

Anyone any idea how I track one down and save myself the £960 bill? biggrin

carlpea

381 posts

170 months

Sunday 14th April 2013
quotequote all
The closest one I can find (UK) is

http://www.ebay.co.uk/itm/ALBA-32-LCD32HDF-LCD-TV-...

But there are too many pins. Since the connector used is push fit you may be able to find someone to cut the cable to 22 pins in width. This won't guarantee that the width between the pins is correct...

eltax91

Original Poster:

10,795 posts

237 months

Sunday 14th April 2013
quotequote all
scjgreen said:
One assumes I need to match the code exactly? As well as to match the number of pins? This one isn't the same is it?

Slow

6,973 posts

168 months

Sunday 14th April 2013
quotequote all
Find a crashed one for sale as spares or repair?

Then just get the cable.

TooLateForAName

4,935 posts

215 months

Sunday 14th April 2013
quotequote all
Got a picture of the connectors? They'll be standard parts.

Or take the cable into a Maplin or RS - depending on what is nearby and let them sort you out.

DrDeAtH

3,706 posts

263 months

Sunday 14th April 2013
quotequote all
+1 for maplin. Bit of cable and a pair of connector for under a fiver. Might be lucky and a computer floppy or ide cable might fit

DrDeAtH

3,706 posts

263 months

Sunday 14th April 2013
quotequote all
Cable 40 way. XR77 £2.19 per metre
Double row IDC connector sockets. From 1.49 each

jet_noise

6,109 posts

213 months

Sunday 14th April 2013
quotequote all
Dear e,

looks like FFC/FPC flat cable to me. If so you'll need to know the conductor pitch & no. of ways, cable length, width & thickness.
Farnell search results

Are there any "connectors" on the cable itself or are there just bare conductor areas at the ends plugging into connectors on the PCBs?

regards,
Jet


regards,
Jet

McWigglebum4th

32,414 posts

235 months

Sunday 14th April 2013
quotequote all
Under Mr Driller killer's thumb there is the bare end of a flat cable

So no connectors

PhillipM

6,564 posts

220 months

Sunday 14th April 2013
quotequote all
Just a standard signal cable as used in many laptops, etc, though. Radiospares or farnell will have some I would think, or something could be knocked up using CAT5.

eltax91

Original Poster:

10,795 posts

237 months

Sunday 14th April 2013
quotequote all
McWigglebum4th said:
Under Mr Driller killer's thumb there is the bare end of a flat cable

So no connectors
hehe @ mr driller killer

In terms of marlin, I have been there and got a big fat 'no'. I have a visit to RS planned with potentially the right thing.

From the cable itself, all I can ascertain is that it has 22 pins and is flat ended, has no connectors. It plugs into sockets soldiered on the pcb that 'clamp' it in place. also it's 12mm wide (ish).

PhillipM

6,564 posts

220 months

Sunday 14th April 2013
quotequote all
You'd have to cut two wires off, but depending on length...

http://uk.rs-online.com/web/c/cables-wires/ribbon-...

David A

3,727 posts

282 months

Sunday 14th April 2013
quotequote all
You've chopped, what, 10 of them? First thing I'd try is split them out drip the ends and join & solder with a bit stripped from inside cat5 or similar. Won't look 100% but should work I reckon.

s p a c e m a n

12,163 posts

179 months

Sunday 14th April 2013
quotequote all
Google how to repair it, quite a few hits from using a conductive pen and sticky tape through to splicing it and bridging the wires. You've only broke a couple of them so its worth a hit if you can't find a replacement.

eltax91

Original Poster:

10,795 posts

237 months

Sunday 14th April 2013
quotequote all
David A said:
You've chopped, what, 10 of them? First thing I'd try is split them out drip the ends and join & solder with a bit stripped from inside cat5 or similar. Won't look 100% but should work I reckon.
You saw my other thread, right? hehe

David A

3,727 posts

282 months

Sunday 14th April 2013
quotequote all
eltax91 said:
You saw my other thread, right? hehe
Yeah you'll be fine. Bet you could even hodge it by twisting them rather than solder wink

s p a c e m a n

12,163 posts

179 months

Sunday 14th April 2013
quotequote all
Apparently phoning this lot may get you somewhere, they keep popping up in help threads as sumitomo suppliers. http://www.digikey.co.uk/

eltax91

Original Poster:

10,795 posts

237 months

Sunday 14th April 2013
quotequote all
s p a c e m a n said:
Apparently phoning this lot may get you somewhere, they keep popping up in help threads as sumitomo suppliers. http://www.digikey.co.uk/
Thanks spaceman. I will check them out tomorrow.

PhillipM

6,564 posts

220 months

Sunday 14th April 2013
quotequote all
eltax91 said:
You saw my other thread, right? hehe
Yeah, I think you'd better post it me and I'll fix it, I'm not sure a couple of nails and some duct tape will work hehe