please give me your thoughts..
please give me your thoughts..
Author
Discussion

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
Right so I have a leaking Sump gasket and rear crank seal.. I have split the box from the block and I have been inspecting the clutch.. the pictures aren't that good but hopefully will be good enough for some online diagnosis.. I'm checking for oil contamination, looks like There is plenty of life left in the plate just need some second hand advice.
I can see that the plate is slightly shiny back, does this mean oil has got its grip on the clutch? Here's the pics anyway





All advice is highly appreciated cheers

DKS

1,928 posts

215 months

Monday 15th April 2013
quotequote all
Is it slick? Does schmoo come off on your hand when you touch it?

Steffan

10,362 posts

259 months

Monday 15th April 2013
quotequote all
If the plate has glazed over you need to change it. It looks borked to me. I would change it.

jjones

4,492 posts

224 months

Monday 15th April 2013
quotequote all
i had a slipping clutch on an audi tt, turns out it wasn't the clutch/pressure plate but a knackered slave cylinder. expensive lesson that one!

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
Yes its slick as in smooth to touch and it does leave a little black sludge on my fingers, what colour should the clutch plate be? Brown? It's got bits of brown and bits of shiny slick black. :s

McSam

6,753 posts

206 months

Monday 15th April 2013
quotequote all
Smooth to the touch? It's a friction plate, ffs hehe no way I would waste my time refitting that.

Evoluzione

10,345 posts

274 months

Monday 15th April 2013
quotequote all
Was it slipping before you took it out? If not....

Re-lining is more cost effective if you're skint/a tightwad.

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
McSam said:
Smooth to the touch? It's a friction plate, ffs hehe no way I would waste my time refitting that.
Haha...:/ yh makes sense... but give me credit I've never touched a clutch before so i dont know what one should feel like!! biggrin

VinceFox

20,566 posts

203 months

Monday 15th April 2013
quotequote all
If it's a get you to the end of the month type thing you can burn the oil contaminant out.

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
Evoluzione said:
Was it slipping before you took it out? If not....

Re-lining is more cost effective if you're skint/a tightwad.
Yes it was slipping when I took it out.. don't mind getting a new clutch, just wondering if this was in need of replacing or whether its fixable, thanks for your reply

Evoluzione

10,345 posts

274 months

Monday 15th April 2013
quotequote all
cra1gy1989 said:
McSam said:
Smooth to the touch? It's a friction plate, ffs hehe no way I would waste my time refitting that.
Haha...:/ yh makes sense... but give me credit I've never touched a clutch before so i dont know what one should feel like!! biggrin
They're smooth when they are still ok, just like brake pads and discs.

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
VinceFox said:
If it's a get you to the end of the month type thing you can burn the oil contaminant out.
No no its a weekend car, just want to learn more about engines and the like, so no rush really, just after some more experienced advice. Cheers

McSam

6,753 posts

206 months

Monday 15th April 2013
quotequote all
If it was slipping when it came out, is smooth to the touch and has black bits that come off on your hands, nooo way. You've already done the hard/expensive bit accessing and removing it anyway smile

cra1gy1989

Original Poster:

293 posts

175 months

Monday 15th April 2013
quotequote all
Thankyou, well ill get a new one, is it just the plate that should be changed? Or the case and bearing aswel?

Evoluzione

10,345 posts

274 months

Monday 15th April 2013
quotequote all
cra1gy1989 said:
Yes it was slipping when I took it out..
Nothing more to say then...

VinceFox

20,566 posts

203 months

Monday 15th April 2013
quotequote all
cra1gy1989 said:
VinceFox said:
If it's a get you to the end of the month type thing you can burn the oil contaminant out.
No no its a weekend car, just want to learn more about engines and the like, so no rush really, just after some more experienced advice. Cheers
In that case, definitely replace.

davepoth

29,395 posts

230 months

Tuesday 16th April 2013
quotequote all
cra1gy1989 said:
Thankyou, well ill get a new one, is it just the plate that should be changed? Or the case and bearing aswel?
Look at it this way. If one of the other parts fails you need to take it all apart again. Do the full kit and forget about it.