removing door panels
Discussion
>trying to be helpful<
Depends on the door, the tools you have and your skill. Some doors you just undo all the stuff screwed on (arm rests and stuff), carefully pull out the clips (sometimes tricky if you don't know where they are and don't have a suitable lever) then just lift the door card off.
Unscrewing parts is easy. Pulling clips off can break the clips, or sometimes the door card. Some cars also have airbags in the door. I've no idea what you do about those.
It might help if we knew why you need to get the door cards off - there might be a better way of doing it.
Google might throw up a service manual for your car to tell you exactly what to do.
Depends on the door, the tools you have and your skill. Some doors you just undo all the stuff screwed on (arm rests and stuff), carefully pull out the clips (sometimes tricky if you don't know where they are and don't have a suitable lever) then just lift the door card off.
Unscrewing parts is easy. Pulling clips off can break the clips, or sometimes the door card. Some cars also have airbags in the door. I've no idea what you do about those.
It might help if we knew why you need to get the door cards off - there might be a better way of doing it.
Google might throw up a service manual for your car to tell you exactly what to do.
Assuming you're talking about the inside, it's possible. You'll need to know exactly where the clips are around the card though, otherwise you're just shooting in the dark and potentially damaging the door for no reason.
If you're talking about the outer... impossible. It will be welded and/or bonded.
If you're talking about the outer... impossible. It will be welded and/or bonded.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


