Wheel Powder Coat or Painted?
Wheel Powder Coat or Painted?
Author
Discussion

pdr479

Original Poster:

444 posts

269 months

Wednesday 17th April 2013
quotequote all
I intend to have a second set of wheels for my car but fancy them in gloss black, in the PH collectives experience what is better painted or powder coated, something somewhere in the back of my mind is telling me powder coated wheels are a bit dull ie not so shiny as painted.
Paul

Grey Ghost

4,611 posts

251 months

Wednesday 17th April 2013
quotequote all
If you want the wheels done properly and fancy a drive over to Gillingham for a first hand idea of what can be done in what finish and what colour go to Lepsons.

www.lepsons.com

Truly brilliant at what they do thumbup

Gilhooligan

2,221 posts

175 months

Wednesday 17th April 2013
quotequote all
I got my wheels powder coated white and they came up really shiny. After they have been powder coated they should be lacquered to protect it which gives it the shine. Its also a much thicker coating than paint so will offer greater protection.
You basically cant go wrong with powder coating imo.

bigdom

2,361 posts

176 months

Wednesday 17th April 2013
quotequote all
My Alpina's where refurbished by Lepsons last year, their work doesn't appear to be as good as they've been in the past, a few chips already all the way through - maybe just unlucky?

I heard good things about these http://www.wheelrefurbishing.co.uk/

MrC986

3,755 posts

222 months

Wednesday 17th April 2013
quotequote all
If I am right, the powder coating process uses a magnetic type approach to bond the powder particles to the surface, the wheel is then baked and also lacquered etc. A good powder coat finish will also have been after the wheel is fully stripped of its previous finish and the repairs are then done to deal with wheel imperfections/damage whereas some paint finishes might be more of a sanding process and might even be the face of the wheel rather than a full wheel treatment.

The recommendation for Lepsons is a good one and you would be recommended to visit before you buy unless you are using someone like Exel Wheels who have a good reputation if you read the Porsche/Audi forums on PH....they offer a full removal/temporary replacement/refitting service and can also protect the new paint finishes with a sealant and will 'shine' your tyres as they are put back on the car if you have one particular level of service! - they also use Lepsons and will be very sure that the finish provided meets not only your standards but also theirs. A good wheel refinisher will also be able to correct a reasonable buckled wheel - this is definitely a service where you get what you pay for yes

EvoSlayer

1,952 posts

216 months

Wednesday 17th April 2013
quotequote all
I've had plenty of wheels refurbed over the years and imho powder coating is ok for something fairly straightforward, however, painting gives a much better finish and your only limiting factors are your imagination and your budget. I've found that results can vary dramatically and generally you get what you pay for.

A couple of examples of the best ones I've had done...

...Powder coated...



...And painted...




pdr479

Original Poster:

444 posts

269 months

Friday 19th April 2013
quotequote all
Thanks, i am in Essex i might just give Lepsons (i think) a try i will post up the results when i get the wheels finished thanks again.
Paul

pdr479

Original Poster:

444 posts

269 months

Friday 19th April 2013
quotequote all
Just spoken to lepsons really helpfull, thanks Ph collective what would i do without you

Krikkit

27,943 posts

212 months

Friday 19th April 2013
quotequote all
Has anyone had a set of wheels done in the flexible powder coat? I realise colour range is limited, but it looks like a very hard-wearing finish that would shrug off stone chips nicely.