More anonymous damage to one of my cars.
More anonymous damage to one of my cars.
Author
Discussion

MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
Son No.1 said:
.
Dad, when did you put a big dent on the rear bumper?
.
WHAT !!


Not another one. Yes, here it is thanks to some uncaring plonker out there somewhere :~



It did not used to be like this. I say that before anyone poses accusations of rose tinted spectacle deployment! In the now ever more distant past, there would have been a note slipped under the windscreen wipers with contact details. Not now. Someone damaged my wife's MG, then having a sly look round, piffed off. What that nasty piece of work did not realise was someone in a nearby first floor office saw what happened, made a note of the car's reg no and they slipped that note under her windscreen wipers. The Police were not too enthusiastic to do much about it at first, no doubt because more than a simple tick in the box required, but, eventually did follow it up with a 'result'. They explained that the miscreant, who lived in a 'nice and respectable' part of the city, with "me-me-me" Political Posters in the windows come election time ~ by pure coincidence I have a friend who lives nearby ~ denied any knowledge at first but eventually coughed up!!

So now this ~ Another time consuming repair job I could do without. Thanks a bunch and a pox on the miscreant and their issue ... :grrrrrhhh!! ..

Anyway, that little rant behind me now, I have the technology and shall tackle this damage as I did with the Rover 25 Bumper in my other thread .. smile :~

http://forums.mg-rover.org/showthread.php?t=505721

I gave the hidden 10mm self tapping screws which locate the bumper to the trailing edge of the rear wheel arch a good soaking in Penetrating Fluid. I don't think those have ever been disturbed since the car left Longbridge over a dozen years ago. Even though they are located into nylon blocks in the wings, those screws soon become corroded as they are exposed to road filt and damp which makes removal very difficult sometimes. These were easily removed thanks to that fluid I sprayed in the area. There were two large plastic fasteners on the underside of the bumper and five similar ones along the top of the bumper in the boot shut area. Those few are the only fasteners but, they do locate and hold the bumper securely. Soon had the bumper off after a little adjustment around the Tow Bar Ball Hitch. It revealed light damge to the bodywork behind the bumper and also the accumulations of road grit and filth built up in these areas over the miles and years :~





Close up :~



Soon swept that lot out ~ quite a lot :~



Removed the Chrome effect Plastic Inserts from the Bumper then I spent a few minutes with blocks of wood and a club hammer. Soon had the dent returned close to where it was before the impact. I can repair this and already have some paint left over from working on scuffs also "donated" anonymously in the past to this car.

By this time the wind had built up to near strong gale which blew over a large potted plant on my patio. Never had that happen before. I can hardly move that pot, let alone lift it! Large trucks being blown over in parts of the country. Trying to hold the Bumper in that strong wind persuaded me to pack up and resume the job tomorrow, weather allowing. I can still hear the wind outside as I type this. Not so strong now though.

There's a long crack in the bumper which can be repaired reasonably well as I did previously in the thread above. I have masses of fibre glass unused from the kit I bought for the previous repair to my son's bumper.

Ongoing.

Edited by MGJohn on Thursday 18th April 11:59

MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
Took advantage of about two hours of 70% blue skies from around four O'Clock. The G-Cramps could not be relied on to hold the edges together. The inbuilt stress in the bumper moulding were simply too powerful so had to resort to a stronger method I've used before. Strong wire to clip the edges together. Not pretty, but effective :~



No matter how carefully I arranged things, I could not get a perfect alignment of the edges in the crack simply because of those moulding stresses holding it apart. Come across this problem before with a similar repair. Anyway, ever onwards.

So, will need to do a bit more final finishing to get the area near the mark. That's for later. Anyway, a few layers of Fibre Glass with the wires in place and leave overnight :~



Time and weather allowing, will remove those wires tomorrow and a couple more layers of fibre glass for strength.

SebastienClement

1,952 posts

171 months

Thursday 18th April 2013
quotequote all
It's awful isn't it? Happens an awful lot round here.

Out of interest, I thought you were moving that car on a while back?

MJK 24

5,679 posts

267 months

Thursday 18th April 2013
quotequote all
There's no way on earth that the person responsible didn't know they've done that. I would estimate an impact of up to 5mph. Disgraceful really.

talksthetalk

10,821 posts

166 months

Thursday 18th April 2013
quotequote all
Bloody annoying. Got to shell out 400 on keying and a scuffed corner and wing mirror. Scuffs - fair enough, parked on road for last three years - parallel parking, it can happen, keying cos my missus stood up to a bullying nobhead in a meeting. No proof, but we made him pay over time....

All that jazz

7,632 posts

177 months

Thursday 18th April 2013
quotequote all
I like how this thread has turned from a rant thread into a detailed build thread. hehe

fjord

2,143 posts

168 months

Thursday 18th April 2013
quotequote all
Who gives a st? It's only a fking rover.

























Jokes bro. Selfish morons. Hope you get it fixed easily

CoolHands

23,720 posts

226 months

Thursday 18th April 2013
quotequote all
that looks hideous

MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
SebastienClement said:
It's awful isn't it? Happens an awful lot round here.

Out of interest, I thought you were moving that car on a while back?
I did, then a few weeks later bought it back. The car started running poorly and the purchaser turned up on my doorstep. The lady owner wanted to keep it and I offered to put it right. However, her partner who was against the purchase in the first place ~ he drives French ~ insisted I take the car back which I was happy to do for an acceptable price to me.

Long story short, all that had happened was that the internals of the catalytic converter had broken up so the engine could not breath properly. I had a spare and fitted that. Been using the car ever since. Nice to have it back. It's a nice car.


MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
MJK 24 said:
There's no way on earth that the person responsible didn't know they've done that. I would estimate an impact of up to 5mph. Disgraceful really.
Now fully retired, I am able to do some of the family shopping on weekday mornings. Trips to the supermarket during daylight where previously it would be 9 O'Clock at night. real eyeopener. Sickened by what I now sometimes see.

The proliferation of SUVs, 4-be-4s some of Monster Truck dimensions, the "Didn't feel a thing " syndrome is now rife apparently by the spatially unaware types who appear mainly attracted to those vehicles, many quite old although I doubt as old as I.

I do not need a set of rose tinteds to know it did not used to be like that. In the past a note would be slipped under the wipers with an apology and contact details. Move on some years, decades even when a nasty piece of work put a large dent in my wife's then fairly new MG ZS. Then having a sly look around, piffed off sharpish. What he did not know was a woman in a nearby first floor office observed the incident, made a note of the number and slipped that note under the wipers.

Police did not have much enthusiasm to do anything, maybe because they have more important things to do like putting a tick in a box. However, they did get a 'result' and provided me with the other driver's details sometime later. Police told us that at first the driver denied all knowledge then, after further questions no doubt with a witness in mind, coughed up.

On more than one occasion I have returned to my cars to observe the door mirror broken off and hanging only by the electrical connections. There's no end to it really.

Say what you like, I can assure you it really did not used to be like this.

MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
All that jazz said:
I like how this thread has turned from a rant thread into a detailed build thread. hehe
Glad someone gets pleasure out of it ... wink

It's only an old Rover true and I have several other nicer cars at my disposal but, I like this car very much. It still has much going for it and a nice place to be with lots of goodies. All work and more importantly, quite a nice turn of pace for an old Rover thanks to a very willing 1.8 K-Series.

Geekman

2,908 posts

177 months

Thursday 18th April 2013
quotequote all
I had someone do this to my car and drive off, cost me £1000 to repair. Incredibly frustrating, couldn't put it through insurance due to my age so I had to just pay the body shop direct. Still really pissed off about it mad


MGJohn

Original Poster:

10,203 posts

214 months

Thursday 18th April 2013
quotequote all
Bad luck Geekman. Far too much of it about.

MGJohn

Original Poster:

10,203 posts

214 months

Friday 19th April 2013
quotequote all
Used pliers to carefully remove the wire clips. Straightening them first so they came out cleanly rather than impatiently trying to twist them out and risk undoing all my Fibre Glass work :~



Not perfect but, near the mark and will be acceptable after filling and finishing :~



I then later applied two more thin layers of Fibre Glass. Even though the existing Fibre Glass is surprisingly strong, more strength is better.

So, yesterday's work :~



Soon became stronger with this :~



Now very strong. Pleased with that. The upper surface is not ideal but can be improved with careful filling and finishing. So, here's the "before" image:~



The "after" follows later ... wink

s m

24,494 posts

234 months

Friday 19th April 2013
quotequote all
Good work fella - look forward to seeing the end result

rallycross

13,763 posts

268 months

Friday 19th April 2013
quotequote all
thats a shame, people just dont give a damn, might be worth a look on ebay, Bumpers are Us in Kent usually have a good stock from £25 plus delivery.

TheHeretic

73,668 posts

286 months

Friday 19th April 2013
quotequote all
I found a section of paint on my Vit that is not scratched, covered in mud, or a bit dented...


I suspect a neighbour.

sc4589

1,960 posts

196 months

Friday 19th April 2013
quotequote all
The thing that annoys me most is door dings. They look so st, they cost a fair few quid to get sorted and they're just a result of abject carelessness and lack of respect for others.

My ex was a nightmare for them, it got to the stage where I ended up leaving her number when she wasn't looking and enjoying the look on her face when she got a call from the party in question. She soon stopped doing it.

Good to see your hands-on nature is working out for you, John... shame you had to do it though. aholes.

Waugh-terfall

18,488 posts

231 months

Friday 19th April 2013
quotequote all
I was outside a Bupa Health Centre a few months ago, woman in an e39 estate buggers up her park job, drags the nose through the hedge and the side across the front of the new, black Range Rover to her left. She got out, inspected the damage, and walked off. I left the Range Rover driver a note under his/her wiper. I'd hope someone would do the same if ever my car was hit.

Bonefish Blues

36,994 posts

254 months

Friday 19th April 2013
quotequote all
Looking on the bright side, no rust at all, even given all the gunk the car's been carrying around these many years.