Traffic Light - Why Only Green Louvred?
Traffic Light - Why Only Green Louvred?
Author
Discussion

Octoposse

Original Poster:

2,425 posts

216 months

Monday 22nd April 2013
quotequote all
A "friend" who sometimes thinks about small things too much was . . .

. . . sitting on a bus today (upstairs, at the front of course) . . . built up area, uphill, outside a hospital.

Looking ahead, saw pedestrian pressing button on a Puffin crossing . . . "Wasting your time, luv" thought I (oops), "Lights aren't working". Then the amber came on, then the red.

As we got closer I noticed that the green light only had a louvred cover, so was completely invisible on my line of sight - amber and red were naked.

Really trivial, but is there a logical reason, or were they just using up whatever bits they had left?

miniman

30,237 posts

293 months

Monday 22nd April 2013
quotequote all
I guess the worst that can happen if you mistakenly stop at red or amber is that you don't hit anything.

SnipsSt

238 posts

238 months

Monday 22nd April 2013
quotequote all
I guess there's no danger if the red or amber are seen from the wrong direction - worst case is that they stop unnecessarily, whereas it's vital that only the traffic approaching that signal sees the green?


simonre7

85 posts

189 months

Monday 22nd April 2013
quotequote all
I would guess so the hospital next door doesn't get green light lighting up their rooms at night.

Jamirecluse

465 posts

182 months

Monday 22nd April 2013
quotequote all
If you see green in distance you'll be less prepared to stop or slow.
Makes traffic approach with caution if umsure.

TheEnd

15,370 posts

219 months

Monday 22nd April 2013
quotequote all
Have a look in streetview, you usually tend to see those near junctions where there might be separate controls in the next lane, or nearby.