Can you ask the council to remove a speed bump?
Discussion
Well I've collected the new car yesterday and on driving back to my house have found that I can't get to my house, without scraping the underside
(large brick riased humps on either end of the road that my road leads from).
Is there any way that I can request the council to remove the humps? - well just the one would be ok!
Although the new car is lowered the offending hump is high, my dad's standard Jag S type scraped as did my previous 335i.
Gratuitous car picture:

(large brick riased humps on either end of the road that my road leads from).Is there any way that I can request the council to remove the humps? - well just the one would be ok!
Although the new car is lowered the offending hump is high, my dad's standard Jag S type scraped as did my previous 335i.
Gratuitous car picture:

The car is on lowered springs front and coilovers rear, but the exhaust B pipe hangs lower (it's this which catches).
This is the table in question (if streetview works):
http://maps.google.co.uk/maps?hl=en&q=maps+bro...
You will notice that it's sunk slightly on the left, going up the hill. I turn left onto Keswick Road from there.
This is the table in question (if streetview works):
http://maps.google.co.uk/maps?hl=en&q=maps+bro...
You will notice that it's sunk slightly on the left, going up the hill. I turn left onto Keswick Road from there.
The speed table at the junction with Keswick Rd doesn't look particularly sunken, it looks like it follows the natural (quite steep) profile of the road. I'll add a disclaimer that Google street view images aren't the best for estimating dimensions, but it looks pretty acceptable to me.
kambites said:
kiethton said:
The car is on lowered springs front and coilovers rear, but the exhaust B pipe hangs lower (it's this which catches).
How low is the lowest point?If it's below about 10cm, the council will just (reasonably enough really) tell you go and fix your car.
kiethton said:
The car is on lowered springs front and coilovers rear, but the exhaust B pipe hangs lower (it's this which catches).
That's because the B pipe is a stupid design on the EP3 which hangs down unnecessarily low. I have the original exhaust and suspension and mine scrapes the B pipe going in and out of my driveway.kiethton said:
I'll need to check later as I'm currently at work and only collected the car last night. It wouldn't surprise me if it's around 10cm as it catches on almost all humps, I have to drive with one wheel on the humps that you are meant to straddle as it grounds there also.
Time to fit some more sensible suspension then, I feel. 
There is very little you can do if the hump conforms to road laws and your car is modified. I face your same problem with 2 speedhumps on the way to work. I have noticed the lack of CCTV in the area and often questioned whether or not I should borrow a pneumatic drill to solve the problem. The council actually removed all of the speeedhumps in the area apart from this one stretch of road.
My solution to the problem is to bike to work until they continue with the removal of the speedhumps. Although I would love nothing more than to assist in this removal process with said pneumatic drill!
My solution to the problem is to bike to work until they continue with the removal of the speedhumps. Although I would love nothing more than to assist in this removal process with said pneumatic drill!
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


