Favourite machined part
Discussion
Inspired by the giant con-rod in this thread...
Let's see some pictures of your favourite machined part. Not necessarily engine parts, more anything that has been machined or forged or whatever out of metal.
I really like valves for some reason, like those used in the RV3 project (pics stolen from main RV3 thread:


Let's see some pictures of your favourite machined part. Not necessarily engine parts, more anything that has been machined or forged or whatever out of metal.
I really like valves for some reason, like those used in the RV3 project (pics stolen from main RV3 thread:


Had a nice manifold machined up from a drawing I did for my kart project to accept a 41mm carb instead of the standard 36mm


Dads bimota has some lovely bits such as this billet top yoke

Some nice bits on dads ultima build too

One of the nicest things I've seen was a MotoGp Yamaha YZR M1 engine, jewel like engineering. Look at those billet ally crankcases





Dads bimota has some lovely bits such as this billet top yoke

Some nice bits on dads ultima build too

One of the nicest things I've seen was a MotoGp Yamaha YZR M1 engine, jewel like engineering. Look at those billet ally crankcases




Great thread.
Designed these bad lads when I was at uni for our Formula Student car. Front wheel 'uprights'. This pic is after they came off the CNC machine programmed in by one of the other guys. I then had to finish the wheel bearing bore and add the holes for the calipers, steering rod, and suspension arms. Can't find a finished pic at the moment.

Did a lot of machining for the car and loved almost every minute of it. It can be serious squeaky bum time when you're down to the last few thousandths on something like a bearing bore on a part that you know has had many hours put into it!
Designed these bad lads when I was at uni for our Formula Student car. Front wheel 'uprights'. This pic is after they came off the CNC machine programmed in by one of the other guys. I then had to finish the wheel bearing bore and add the holes for the calipers, steering rod, and suspension arms. Can't find a finished pic at the moment.

Did a lot of machining for the car and loved almost every minute of it. It can be serious squeaky bum time when you're down to the last few thousandths on something like a bearing bore on a part that you know has had many hours put into it!
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




.