Old school number plate with light each end?
Discussion
FourWheelDrift said:
Aren't the light fittings on the car rather than the plate, which is fitted in between?
I know what you mean but I have seen a complete mounting plate with the light fitted each end; used to see them a lot 20 years or so ago but struggling to even find a photo now.I might have to start looking into body mounting the lights as you say if I'm unable to find anything.
Chrome mini style plate lights are readily available.
iPlod999 said:
Thanks, yes it's close but I need just the number plate illuminated.I'm thinking that I'll perhaps make the mounting plate myself; oversized to accomodate the plate and lights or as FWD said, fix the plate lights to the body and the plate between them. This wouldn't be as good though as the body shape is curved upwards.
http://www.kitspares.co.uk/shop/item.php?product=4...
You used to able to buy the whole lot assembled, but I can't find them now.
You used to able to buy the whole lot assembled, but I can't find them now.
MX7 said:
http://www.kitspares.co.uk/shop/item.php?product=4...
You used to able to buy the whole lot assembled, but I can't find them now.
That's right, you did but since we can't find them I'm guessing that the demand for them is so low that they don't produce them now.You used to able to buy the whole lot assembled, but I can't find them now.
Looking like I'll have to fabricate one myself with the lamps you posted and those posted above (same lamps); thanks all

mini van / estate
mini machine in darlington sell the backing and the brackets (if needed)
01325 381300
the 'D' shaped lights can be got in black plastic, chrome plastic or nice metal chrome
http://www.m-machine.co.uk/catalogue.html
picture of it
http://www.minispares.com/product/Classic/Body/Pan... to
mini machine in darlington sell the backing and the brackets (if needed)
01325 381300
the 'D' shaped lights can be got in black plastic, chrome plastic or nice metal chrome
http://www.m-machine.co.uk/catalogue.html
picture of it
http://www.minispares.com/product/Classic/Body/Pan... to
Edited by guru_1071 on Monday 29th April 17:02
guru_1071 said:
mini van / estate
mini machine in darlington sell the backing and the brackets (if needed)
01325 381300
the 'D' shaped lights can be got in black plastic, chrome plastic or nice metal chrome
http://www.m-machine.co.uk/catalogue.html
picture of it
http://www.minispares.com/product/Classic/Body/Pan... to
mini machine in darlington sell the backing and the brackets (if needed)
01325 381300
the 'D' shaped lights can be got in black plastic, chrome plastic or nice metal chrome
http://www.m-machine.co.uk/catalogue.html
picture of it
http://www.minispares.com/product/Classic/Body/Pan... to
Edited by guru_1071 on Monday 29th April 17:02
That sounds and looks spot on!
Thank you

I'm removing my overrider's on my MGB and they have the numberplate lights fitted in them.
The B looks so much nicer without the front overrider's fitted and it would look odd to leave them on the rear so I need to fit the backing plate and brackets and lamps as an alternative.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


