car vinyl removal
Discussion
Looking for some advice. I have a Fiesta ST with over the top stripes. I’ve had it for about 6 years and to be honest I’m fed up of them. They could do with getting replaced in parts and they are showing their age.
I’m too old for them (26 this year) and the car stands out too much and brings too much attention with it.
So I plan to remove the top ones and keep the sides.
I just planned to heat them up using a hair dryer and remove them carefully with a blade, is it as simple as that.
The question is would I need to get it detailed after I’ve removed them, they’ve been on 6 years and I’m wondering if uv ageing will have faded the areas that aren’t covered. If so how much would a detail be “roughly” for a fiesta to get done.
Or will just a good wash, wax and polish bring it up looking fine?
I’m too old for them (26 this year) and the car stands out too much and brings too much attention with it.
So I plan to remove the top ones and keep the sides.
I just planned to heat them up using a hair dryer and remove them carefully with a blade, is it as simple as that.
The question is would I need to get it detailed after I’ve removed them, they’ve been on 6 years and I’m wondering if uv ageing will have faded the areas that aren’t covered. If so how much would a detail be “roughly” for a fiesta to get done.
Or will just a good wash, wax and polish bring it up looking fine?
Heat them or use a steam cleaner to lift would be best method.
What you'll probably find is the paint underneath is perfect and it's actually the rest of your bonnet that has faded. Friend recently removed the stripes from his Blue Mini Cooper S and he thought it might have faded under the vinyls but it was as good as new the paint underneath and much brighter than the rest of the bonnet which had faded over around 6 years as well.
What you'll probably find is the paint underneath is perfect and it's actually the rest of your bonnet that has faded. Friend recently removed the stripes from his Blue Mini Cooper S and he thought it might have faded under the vinyls but it was as good as new the paint underneath and much brighter than the rest of the bonnet which had faded over around 6 years as well.
MysteryLemon said:
As above, hairdryer will do the job to help peal off the vinyl easily.
Don't overheat the vinyl though it only needs to be relatively warm, if it is too hot you will find it breaks into small pieces. For the bonnet stripes removing after driving will help as will parking in the sun for an hour or so before hand 
Don't use a blade.
Heat gently with a hairdryer but not so much that it will seperate the vinyl and the adhesive. The adhesive can be a bit of a sod to get off but can be done. I recently took the graphics off mine and it did require a fair bit of elbow grease to get it how I wanted. I used a gentle compound, then several layers of glaze followed by a good waxing or three.
FYI this was done on a 4 year old orange car and I much prefer how it looks now.
Heat gently with a hairdryer but not so much that it will seperate the vinyl and the adhesive. The adhesive can be a bit of a sod to get off but can be done. I recently took the graphics off mine and it did require a fair bit of elbow grease to get it how I wanted. I used a gentle compound, then several layers of glaze followed by a good waxing or three.
FYI this was done on a 4 year old orange car and I much prefer how it looks now.
SEE it does stand out

I'd just leave them on but they are fraying at the edges and cracking in bits.
plan is it leave the side ones on.
thanks for the advice about not using a blade.
To be honest the car owes me nothing but I wont be changing it for another 5 years hopefully. But I want it looking as good as I can. Add in the fact I dont want to fling loads of money at it because I have two bikes to keep on the road.
I was going to use a clay bar on the wheels, the compomotives are white and are a minging nicotine colour now due the salt and grit on the roads. They might need to be re-sprayed though.
PHuzzy said:
Yup, IMO they seem a bit OTT, the standard ST wheels are really nice and suit the car better.
you are the first person I have ever met who said that he didnt like the compomotives.ive had people in car parks and in the street ask me where I got them or what they are.
And im not just talking about boy racers I had a 40 year old at b and q just comment how nice they were.
kayzee said:
I think the wheels are nice... don't like stripes at all though personally I'd remove the side ones too! You plan to have the car for 11 years? That's quite some dedication 
Its quite easy to when you have two bikes sitting there.
Its all the car I need, it goes to the football, picks up the o/h and goes to asda once a week.
plus I actually love the wee thing, I couldnt trade it in because I'd miss it.
moanthebairns said:
SEE it does stand out

I'd just leave them on but they are fraying at the edges and cracking in bits.
plan is it leave the side ones on.
thanks for the advice about not using a blade.
To be honest the car owes me nothing but I wont be changing it for another 5 years hopefully. But I want it looking as good as I can. Add in the fact I dont want to fling loads of money at it because I have two bikes to keep on the road.
I was going to use a clay bar on the wheels, the compomotives are white and are a minging nicotine colour now due the salt and grit on the roads. They might need to be re-sprayed though.
moanthebairns said:
SEE it does stand out

I'd just leave them on but they are fraying at the edges and cracking in bits.
plan is it leave the side ones on.
thanks for the advice about not using a blade.
To be honest the car owes me nothing but I wont be changing it for another 5 years hopefully. But I want it looking as good as I can. Add in the fact I dont want to fling loads of money at it because I have two bikes to keep on the road.
I was going to use a clay bar on the wheels, the compomotives are white and are a minging nicotine colour now due the salt and grit on the roads. They might need to be re-sprayed though.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




