Pre MOT checks?
Author
Discussion

FRMATT

Original Poster:

526 posts

193 months

Thursday 8th August 2013
quotequote all
What do you do before taking your car for MOT?

My current plan is:
- Check bulbs
- Check tyres
- Check fluid Levels
- Clean
- Take it for a quick spin to clear out any soot

Is there anything I've missed?

Ozzie Osmond

21,189 posts

277 months

Thursday 8th August 2013
quotequote all
Wipers and washers are a favourite fail. And horn.

PoleDriver

29,627 posts

225 months

Thursday 8th August 2013
quotequote all
Get someone to turn the steering wheel from side to side while you look at various suspension/steering bushes and joints to check for play!
Check shox aren't leaking.
Look for corrosion and wear in the brake pipes. Make sure brake operation is good, including handbrake.
Chips in windscreen
Seat belts operate and are not damaged.

tannedstamina

510 posts

160 months

Thursday 8th August 2013
quotequote all
Ozzie Osmond said:
Wipers and washers are a favourite fail. And horn.
Oh yes, I've had a fail on no screenwash fluid. That sucked.

MGJohn

10,203 posts

214 months

Thursday 8th August 2013
quotequote all
One of the most frequent and annoying minor MoT fails is the rear number plate illumination. Easily overlooked if only one bulb is working. MoT requires TWO lamps working. Check those rear number plate lights.

One of mine failed on an old MG being tested ~ tester gave boot a light slap ~ magic! Passed ... just like that ... ... rofl

lufbramatt

5,697 posts

165 months

Thursday 8th August 2013
quotequote all

Roadster25

272 posts

193 months

Thursday 8th August 2013
quotequote all
Suspension failure - wobbly wheels, worn bushes, broken springs etc.

Horn - only gets used once a per year smile

Tinworm.

FRMATT

Original Poster:

526 posts

193 months

Sunday 11th August 2013
quotequote all
Thanks all,

I did all of those checks, but still got a phone call about 20 mins after dropping it off... we can't get it on any of our ramps. So after nipping back home and spending about an hour winding up my coilovers it passed without any issues.

After the test the bloke was even quite complementary and said it wasn't showing it's 95k miles which is always nice smile he also said it was the lowest subframe he'd tried to test in 12 years of doing it, so I've got something to boast to the "cool kids" in McDonald's carpark about hehe

Edit:
How accurate would you guess the presented weight should be, the one taken as part of the braking tests? Mine seems on the low side.

Edited by FRMATT on Sunday 11th August 13:11