HELP with alloy fitments!! NEWB
Discussion
Hello,
I'm completely new at buying/fitting car parts and have very little knowledge.
I recently bought a golf mk4 and am about to buy a set of new alloys with new fitted tyres.
Info of tyres and alloys are as followed:
5 Stud fitment, 5x100/5x110 PCD,
35mm offset
73.1mm Centre Bore
Tyres are 225/40R18
So i'm wondering what i need to consider before buying?
Correct me if i'm wrong but as far as i know 5x100 pcd is correct fitment for my car, as the bore hole is too big i will need spigot rings.
So the questions are:
Will the standard studs fit the new alloys or will i need to buy new set of studs?
Are the tyres too big or will they fit ?
Also, is it wise to have all four tyres the same size or should the front two be slightly smaller? (Sorry if this is bit of a dumb q)
Does the alloy's offset look right for the golf mk4?
I would also appreciate any other thing i need to consider or any suggestions in general.
Thanks in advance
I'm completely new at buying/fitting car parts and have very little knowledge.
I recently bought a golf mk4 and am about to buy a set of new alloys with new fitted tyres.
Info of tyres and alloys are as followed:
5 Stud fitment, 5x100/5x110 PCD,
35mm offset
73.1mm Centre Bore
Tyres are 225/40R18
So i'm wondering what i need to consider before buying?
Correct me if i'm wrong but as far as i know 5x100 pcd is correct fitment for my car, as the bore hole is too big i will need spigot rings.
So the questions are:
Will the standard studs fit the new alloys or will i need to buy new set of studs?
Are the tyres too big or will they fit ?
Also, is it wise to have all four tyres the same size or should the front two be slightly smaller? (Sorry if this is bit of a dumb q)
Does the alloy's offset look right for the golf mk4?
I would also appreciate any other thing i need to consider or any suggestions in general.
Thanks in advance
jet_noise said:
Dear A,
by how much will your insurance increase when you tell them the car's been modified?
regards,
Jet
I need to change the tyres anyway so i thought it'd be wise to change both alloys and tyres together as it was actually cheaper. I found a good deal with both new alloys and fitted tyresby how much will your insurance increase when you tell them the car's been modified?
regards,
Jet
ABaruwal said:
McWigglebum4th said:
No idea but it will look silly on huge alloys and they will cause untold problems while making your car slower and handle worse
But the outer diameter of the wheels will be the same as the old standard steel wheels with tyrestinkertaylor said:
I'm guessing this is going to be some ridiculous dub car slammed to the ground 
Haha not really.. I wont be touching the suspension at all. The only reason im changing is because the current wheels are 14 inch and looks like they came of a toy car, also they're very old and have age related marks and kerbing.
Chongwong said:
Does the entire wheel fit beneath the wheel-arch, as if you can see Tyre or alloy from above it is illegal (i think, but you'd be best researching that)
Thank you for the only helpful answer. The upgrade alloys will be just few mm bigger than the current wheels in diameter so there're will be plenty of space between the arch and the wheels.Ps. I'm not lowering the car or altering the suspension
ABaruwal said:
Chongwong said:
Does the entire wheel fit beneath the wheel-arch, as if you can see Tyre or alloy from above it is illegal (i think, but you'd be best researching that)
Thank you for the only helpful answer. The upgrade alloys will be just few mm bigger than the current wheels in diameter so there're will be plenty of space between the arch and the wheels.Ps. I'm not lowering the car or altering the suspension
ABaruwal said:
McWigglebum4th said:
You're going to get a nice surprise
Oh dear, you're scaring me :-(Spiggot rings- yep, needed.
Studs - should be fine, usually only need changing if spacers are added.
Keep all tyres the same size, it makes things easier, and shouldn't cause any traction control or ABS problems
Not sure about the offset, have a look on ebay at people selling similar sized wheels and you'll get a feel of what offsets are needed.
TheEnd said:
They might be heavier, but driving to and from work and popping out to the shops isn't going to make a difference.
Spiggot rings- yep, needed.
Studs - should be fine, usually only need changing if spacers are added.
Keep all tyres the same size, it makes things easier, and shouldn't cause any traction control or ABS problems
Not sure about the offset, have a look on ebay at people selling similar sized wheels and you'll get a feel of what offsets are needed.
Thank you so much.. Just what i neededSpiggot rings- yep, needed.
Studs - should be fine, usually only need changing if spacers are added.
Keep all tyres the same size, it makes things easier, and shouldn't cause any traction control or ABS problems
Not sure about the offset, have a look on ebay at people selling similar sized wheels and you'll get a feel of what offsets are needed.
http://www.ebay.co.uk/itm/VW-GOLF-GTI-16-BBS-MONTR...
plus 4 of these
http://www.camskill.co.uk/m62b0s291p98501/Continen...
would be a much better bet
plus 4 of these
http://www.camskill.co.uk/m62b0s291p98501/Continen...
would be a much better bet
mikecassie said:
I think Chongwong is meaning if you are looking directly down from above the wheelarch, do you see any tyre or alloy? The width/offset being different might well render the fitment illegal. Or if not that then it might well rub on the arches as you go over our high quality highways.....
This: I was still feeling last nights beverages,so my explanation was crappy 
I'm not a big fan of Blingy wheels, but each to there own. If you like it and it's legal, do it.

Gassing Station | General Gassing | Top of Page | What's New | My Stuff


