Puncture repair
Discussion
If it is too close for a simple repair, then you can still get it repaired by a proper repair specialist. The process is called 'hot vulcanising' and is quite involved and will involve an overnight, although it will only cost £15-£20.
Remember: just because a tyre fitter tells you that it cant be reoaired doesnt mean that it cant be repaired! Usually they dont know any better and sometimes theyre looking to upsell a new tyre.
Remember: just because a tyre fitter tells you that it cant be reoaired doesnt mean that it cant be repaired! Usually they dont know any better and sometimes theyre looking to upsell a new tyre.
Just noticed national tyres have a diagram here-
http://www.national.co.uk/tyres/
Looks to be just within the range.
http://www.national.co.uk/tyres/
Looks to be just within the range.
Patrick Bateman said:
What sort of places can do that though? I haven't heard of it getting done as a repair before.
I've had it done a couple of times by these guys : http://www.dandrtyres.com/tyre-vulcanising , but probably a bit far for you to travel. I don't know of anybody in the North-East but I'm sure there must be somebody in either Dundee or Aberdeen that does it.Tyre places have charts to tell you where you can and can't.
The flat part of the patch thing generally has to sit flat on the inside of the tyre.
I repair my own tyres on my daily as I can remove tyres without a machine. I've repaired some almost on the sidewall before and they have lasted till the tyres wear out. Lol.
The flat part of the patch thing generally has to sit flat on the inside of the tyre.
I repair my own tyres on my daily as I can remove tyres without a machine. I've repaired some almost on the sidewall before and they have lasted till the tyres wear out. Lol.
Lawbags said:
Tyre places have charts to tell you where you can and can't.
The flat part of the patch thing generally has to sit flat on the inside of the tyre.
I repair my own tyres on my daily as I can remove tyres without a machine. I've repaired some almost on the sidewall before and they have lasted till the tyres wear out. Lol.
Not true: thery have charts which tell you where they can repair with a simple plug. They are happy to let you believe that this is all that can be repaired, but it isnt.The flat part of the patch thing generally has to sit flat on the inside of the tyre.
I repair my own tyres on my daily as I can remove tyres without a machine. I've repaired some almost on the sidewall before and they have lasted till the tyres wear out. Lol.
It's a part worn off ebay.
Can't be f
ked shelling out £600 for a set again so I've got 3 part worns at 6mm for £60 each so far. Finding that final one is a pain though.
Not bad for Continental WinterContact TS 830P's though, I'll get at least 2 winters out of them.
Can't be f
ked shelling out £600 for a set again so I've got 3 part worns at 6mm for £60 each so far. Finding that final one is a pain though.Not bad for Continental WinterContact TS 830P's though, I'll get at least 2 winters out of them.
Edited by Patrick Bateman on Tuesday 13th August 00:06
GC8 said:
Thanks for that I'll maybe give them a buzz tomorrow.Gassing Station | General Gassing | Top of Page | What's New | My Stuff






