Ignition problem - switch or barrel?
Ignition problem - switch or barrel?
Author
Discussion

Toaster Pilot

Original Poster:

14,867 posts

189 months

Tuesday 13th August 2013
quotequote all
My shed seems to have an intermittent starting problem - sometimes the key won't turn to the position that will start the engine therefore it won't start.

Is this likely to be a problem with the ignition switch itself (cheap) or the barrel (expensive due to the need to re-key etc) ? If it's the barrel I can just wire in a push button ignition switch that will start the engine when the ignition is turned on...

LuS1fer

43,570 posts

276 months

Tuesday 13th August 2013
quotequote all
What car is it - profiles are blocked for me in work.

Toaster Pilot

Original Poster:

14,867 posts

189 months

Tuesday 13th August 2013
quotequote all
Skoda Felicia. Late model so it has an immobiliser ergo I can't bypass the ignition barrel altogether or use a generic one.

Krikkit

27,943 posts

212 months

Tuesday 13th August 2013
quotequote all
Chances are it's the barrel itself if it's the key sticking rather than just not activating.

marshalla

15,902 posts

232 months

Tuesday 13th August 2013
quotequote all
Barrel or worn key.

Toaster Pilot

Original Poster:

14,867 posts

189 months

Tuesday 13th August 2013
quotequote all
Never have trouble turning the key to the position that puts all the warning lights on etc so I assume (perhaps wrongly) that the key itself is fine.

shakindog

516 posts

181 months

Tuesday 13th August 2013
quotequote all

Had a similar problem with my accord. Took the barrel off and took it to local timpsons he looked at it told me it was worn. Threw some graphite powder down it and its been bang on everytime.
Saved me a fortune as new barrel would have had new key. Which would have needed coding in to the immobiliser.
Cost was £20 for his time and help

marshalla

15,902 posts

232 months

Tuesday 13th August 2013
quotequote all
Toaster Pilot said:
Never have trouble turning the key to the position that puts all the warning lights on etc so I assume (perhaps wrongly) that the key itself is fine.
Invalid assumption.

I had exactly the same issue on a completely different car. It would go to the accessory position without issue, but wouldn't turn any further because of wear on the key. There was no sign of damage to the barrel and a new key cut to code solved the problem.

Toaster Pilot

Original Poster:

14,867 posts

189 months

Tuesday 13th August 2013
quotequote all
scratchchin

A new key + coding isn't going to be cheap though is it?