Discarding an undertray?
Discussion
My Felicia has an undertray with horrifically rusted/chewed up screws holding it on - some of them will need drilling out to get it off I reckon.
Is it worthwhile trying to find new fasteners to put it back on after I've done some work on it or can I safely discard it without worrying about things getting damaged easily afterwards? It's been on there for 14 years after all so I guess it's there for a reason.
Is it worthwhile trying to find new fasteners to put it back on after I've done some work on it or can I safely discard it without worrying about things getting damaged easily afterwards? It's been on there for 14 years after all so I guess it's there for a reason.
One thing worth mentioning is that the airflow can be disrupted around the cooling system, as it can be designed to work within parameters aided/provided by the undertray dependant on model.
May not be the biggest concern on a 1.9 diesel though! All the same I'd personally keep it on there, largely for the aforementioned oil scenario.
May not be the biggest concern on a 1.9 diesel though! All the same I'd personally keep it on there, largely for the aforementioned oil scenario.
Edited by Repent on Friday 16th August 03:03
Repent said:
One thing worth mentioning is that the airflow can be disrupted around the cooling system, as it can be designed to work within parameters aided/provided by the undertray dependant on model.
Hmmm, might need to sort out the suspected cooling issue first then (the radiator fan doesn't seem to kick in when it should, which I have diagnosed as a faulty coolant temp sensor because it was disconnected when I got the car and the car won't start from warm when it is re-connected (assumedly the reason it was disconnected)I damaged one on a Clio 172. Ran it without with no problems for a couple of years after. I was worried stones/dirt flicked up towards the engine (cambelt was 'on show' from beneath for instance) would cause a problem somehow, but I consulted a mechanic and he said not to worry. Only difference it seemed to make was the bottom of the front bumper bodywork felt more flimsy as it lost some stiffness/support from being connected to the under tray.
Certainly made oil changes simpler too!
Certainly made oil changes simpler too!
Megaflow said:
We have had a Volvo S40 T5 for nearly 5 years, which according to every service guide I look at, should have an undertray and there isn't one. No issues at all.
Our first V70 didn't have one - evidently an option so I read on a forum. I got one off eBay - helps keep the engine clean (it got filthy last winter). Replacement V70 has one fitted. Agreed that they are a total ball ache at oil change time though.
Toaster Pilot said:
My Felicia has an undertray with horrifically rusted/chewed up screws holding it on - some of them will need drilling out to get it off I reckon.
Is it worthwhile trying to find new fasteners to put it back on after I've done some work on it or can I safely discard it without worrying about things getting damaged easily afterwards? It's been on there for 14 years after all so I guess it's there for a reason.
Either leave it off (there will be a tiny increase in drag as well as the other issue already mentioned) or cable tie it on. Is it worthwhile trying to find new fasteners to put it back on after I've done some work on it or can I safely discard it without worrying about things getting damaged easily afterwards? It's been on there for 14 years after all so I guess it's there for a reason.
Cable ties last forever and never rust. Lighter than bolts too.
I tore the one off my Jaguar X300 on a gattle grid I hit at speed. It didn't seem to make any difference but it DID cause more belt squealing when driving through large puddles - presumably it was mostly there to stop water and muck splashing over the alternator/pumps etc at the front of the engine.
Not sure about a more modern car that has panels all the way underneath to control airflow though, but that hardly covers your old Fabia
Not sure about a more modern car that has panels all the way underneath to control airflow though, but that hardly covers your old Fabia

LuS1fer said:
Your engine will get dirtier and may be more prone to water ingress into the electrics. Aerodynamics may mean your fuel consumption increases very slightly.
I'm with the above, it's not a massively important component but it is there for a reason.I would just refit it. Worst case scenario is a set of roller type stud extractors for £20 from machine mart. If you're being a peasant, just drill some speed holes and use zip ties to secure.
15 minutes in either instance.
LuS1fer said:
Your engine will get dirtier and may be more prone to water ingress into the electrics.
This would be my main concern, as well as (admittedly minimal) protection for the sump.It also reduces noise, though not necessarily for the driver's perspective - more for those around.
I would keep it on. Once you get the undertray off, drill a hole next to each existing fixing hole in the tray, then you'll be able to loop cable ties through each one to hold it on.
The undertray on my car has been fixed on using cable ties for about 3 years with no problems and it makes it easy to remove the next time.
The undertray on my car has been fixed on using cable ties for about 3 years with no problems and it makes it easy to remove the next time.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



ks...
